- General Dewatering
- Sand, Sludge and Slurry
- Hydraulic
- Solids Handling
- Corrosion Resistant
- Perfecta Series - Chemical Resistant Sump / Transfer Pumps
- RX Series - 316 Stainless Steel Top Discharge Dewatering Pumps
- JX Series - 316 Stainless Steel Side Discharge Dewatering Pumps
- JXH Series - 316 Stainless Steel High Head Side Discharge Dewatering Pumps
- SKX Series - 316 Stainless Steel Shredder / Cutter Pumps
- SX Series - 316 Stainless Steel Single and Double Vane Impeller Pumps
- High Temp (up to 200°F)
- Explosion Proof (FM Rated)
- MSHA Approved Pumps
- Accessories
- CSA-US Certification
- Case Studies
- Download Product Information & Literature Here
Hours of Operation:
M-F 8:15 - 5:00pm EST
Memorial Day: Closed Monday May 27, 2013
SX08CSS-208T
- 316 Cast Stainless Steel Pumps with Single Vane Impellers for Municipal, Industrial and Agricultural Waste-Water Recommended accessories:
- Manual Starter Box:
- Manual On/Off starter box for SX08CSS-208 = BJM Part# MSB3U030
- Manual On/Off starter box for SX08CSS-230 = BJM Part# MSB3U030
- Manual On/Off starter box for SX08CSS-460 = BJM Part# MSB3T015
- Manual On/Off starter box for SX08CSS-575 = BJM Part# MSB3T015
- Auto Starter Box:
- Auto On/Off starter box for SX08CSS-208 = BJM Part# MSB3U030-F
- Auto On/Off starter box for SX08CSS-230 = BJM Part# MSB3U030-F
- Auto On/Off starter box for SX08CSS-460 = BJM Part# MSB3T015-F
- Auto On/Off starter box for SX08CSS-575 = BJM Part# MSB3T015-F
- Simplex Control Panel - (3 mechanical float switches):
- Three Phase control Panel for SX08CSS-208 = BJM Part# AP31CH
- Three Phase control Panel for SX08CSS-230 = BJM Part# AP31CH
- Three Phase control Panel for SX08CSS-460 = BJM Part# AP31AH
- Three Phase control Panel for SX08CSS-575 = BJM Part# AP31AH
- Duplex Control Panel - (4 mechanical float switches):
- Three Phase control Panel for SX08CSS-208 = BJM Part# AP32CH
- Three Phase control Panel for SX08CSS-230 = BJM Part# AP32CH
- Three Phase control Panel for SX08CSS-460 = BJM Part# AP32AH
- Three Phase control Panel for SX08CSS-575 = BJM Part# AP32AH
- SEAL MINDER: comes standard with the SX-Series pumps. By adding the optional Seal Minder Alarm Box, you can monitor seal failure.
(Specifications dependent on model & may change without notice)
| MAX. FLOW: GPM | 95 |
|---|---|
| MAX. HEAD: ft | 48' |
| PUMP TYPE | Open Vane Non Clog |
| STRAINER OPENING | ###STRAINEROPENING### |
| DISCHARGE SIZE | 2" NPT-M |
| DISCHARGE CONNECTION | ###TX_EXBJMPUMPSPRODUCTS_DISCHARGECONNECTION### |
| MAX. SUBMERGED DEPTH | 65' |
| MIN. SUBMERGED DEPTH | 11" |
| SHIPPING WEIGHT:lbs | 69 |
| MOTOR CASING | 316SS |
|---|---|
| PUMP VOLUTE | 316SS |
| IMPELLER - MULTI VANE | ###IMPELLERMULTIVANE### |
| STRAINER / STAND | 316SS |
| LIP SEALS & O-RINGS | FKM |
| ROTOR SHAFT | 316SS |
| EXTERNAL HARDWARE | 316SS |
| QTY. OIL IN SEAL CHAMBER | 10.1 U.S. FL. OZ. |
| QTY. OIL IN MOTOR STATOR | ###QTYOILMOTORSTATOR### |
| PUMPTOPCOVER | ###TX_EXBJMPUMPSPRODUCTS_PUMPTOPCOVER### |
| PUMP HANDLE | ###TX_EXBJMPUMPSPRODUCTS_PUMPHANDLE### |
| MOTOR RATING: HP | 1 |
|---|---|
| MOTOR RPM | 3450 |
| MOTOR INSULATION CLASS | F |
| MOTOR SERVICE FACTOR | 1.1 |
| VOLTAGE | 208/230/460/575, 3PH-60Hz |
| CURRENT F.L.A. | 3.5 |
| MOTOR PROTECTION | Thermal & Amp Overload |
| POWER CORD: GAGE; LENGTH | A.W.G. 16/4; 33', STOW |
| MAXIMUM LIQUID TEMPERATURE | 104° F |
| Seal Minder® | Standard |
| HousePorts | ###HOSEPORTS### |
|---|---|
| Hydraulic Oil | ###HYDRAULICOIL### |
| HydraulicInputFlow | ###HYDRAULICINPUTFLOW### |
| HydraulicOperatingPressure | ###HYDRAULICOPERATINGPRESSURE### |