- General Dewatering
- Sand, Sludge and Slurry
- Hydraulic
- Solids Handling
- Corrosion Resistant
- Perfecta Series - Chemical Resistant Sump / Transfer Pumps
- RX Series - 316 Stainless Steel Top Discharge Dewatering Pumps
- JX Series - 316 Stainless Steel Side Discharge Dewatering Pumps
- JXH Series - 316 Stainless Steel High Head Side Discharge Dewatering Pumps
- SKX Series - 316 Stainless Steel Shredder / Cutter Pumps
- SX Series - 316 Stainless Steel Single and Double Vane Impeller Pumps
- High Temp (up to 200°F)
- Explosion Proof (FM Rated)
- MSHA Approved Pumps
- Accessories
- CSA-US Certification
- Case Studies
- Download Product Information & Literature Here
Summer Hours of Operation:
M-T 8:15 - 5:00pm EST
Friday 7:15 - 4:00pm EST
Closed:
Independence Day
Thurs. & Fri. July 4-5, 2013
JX22HSS-230T
- 316 Cast Stainless Steel Pumps
- Manual Starter Box:
Recommended accessories:
- Manual On/Off starter box for JX22HSS-208 = BJM Item # 201141
- Manual On/Off starter box for JX22HSS-230 = BJM Item # 201141
- Manual On/Off starter box for JX22HSS-460 = BJM Item # 201121
- Manual On/Off starter box for JX22HSS-575 = BJM Item # 201121
- Auto Starter Box:
- Auto On/Off starter box for JX22HSS-208 = BJM Item # 201142
- Auto On/Off starter box for JX22HSS-230 = BJM Item # 201142
- Auto On/Off starter box for JX22HSS-460 = BJM Item # 201122
- Auto On/Off starter box for JX22HSS-575 = BJM Item # 201122
- Simplex Control Panel - (3 mechanical float switches):
- Three Phase control Panel for JX22HSS-208 = BJM Item # 201085
- Three Phase control Panel for JX22HSS-230 = BJM Item # 201084
- Three Phase control Panel for JX22HSS-460 = BJM Item # 201082
- Three Phase control Panel for JX22HSS-575 = BJM Item # 201080
- Duplex Control Panel - (4 mechanical float switches):
- Three Phase control Panel for JX22HSS-208 = BJM Item # 201096
- Three Phase control Panel for JX22HSS-230 = BJM Item # 201095
- Three Phase control Panel for JX22HSS-460 = BJM Item # 201093
- Three Phase control Panel for JX22HSS-575 = BJM Item # 201091
- Seal Minder®: can be added easily by attaching the optional Seal Minder cord:
- 33’ cord: BJM Item # 201713
- 50’ cord: BJM Item # 201716
- Special installation can be made with EPDM power-cable and elastomers. Contact factory or nearest distributor for details. (BUNA (Nitril) also available).
(Specifications dependent on model & may change without notice)
| MAX. FLOW: GPM | 150 |
|---|---|
| MAX. HEAD: ft | 95' |
| PUMP TYPE | Sump, Side Discharge |
| STRAINER OPENING | 0.375" dia. |
| DISCHARGE SIZE | 2" NPT-M |
| DISCHARGE CONNECTION | ###TX_EXBJMPUMPSPRODUCTS_DISCHARGECONNECTION### |
| MAX. SUBMERGED DEPTH | 65' |
| MIN. SUBMERGED DEPTH | 11.5" |
| SHIPPING WEIGHT:lbs | 94 |
| MOTOR CASING | 316SS |
|---|---|
| PUMP VOLUTE | 316SS |
| IMPELLER - MULTI VANE | 316SS |
| STRAINER / STAND | ###STAND### |
| LIP SEALS & O-RINGS | FKM |
| ROTOR SHAFT | 316SS |
| EXTERNAL HARDWARE | 316SS |
| QTY. OIL IN SEAL CHAMBER | 13.5 U.S. FL. OZ. |
| QTY. OIL IN MOTOR STATOR | No oil in motor stator(after S/N 45359), 16.9 U.S. fl. oz.(before S/N 45359) |
| PUMPTOPCOVER | ###TX_EXBJMPUMPSPRODUCTS_PUMPTOPCOVER### |
| PUMP HANDLE | ###TX_EXBJMPUMPSPRODUCTS_PUMPHANDLE### |
| MOTOR RATING: HP | 3 |
|---|---|
| MOTOR RPM | 3450 |
| MOTOR INSULATION CLASS | F |
| MOTOR SERVICE FACTOR | 1.1 |
| VOLTAGE | 208/230/460/575, 3ph-60 Hz |
| CURRENT F.L.A. | 9 |
| MOTOR PROTECTION | Thermal & Amp Overload |
| POWER CORD: GAGE; LENGTH | A.W.G. 14/4; 33', STOW |
| MAXIMUM LIQUID TEMPERATURE | 104° F |
| Seal Minder® | Optional |
| HousePorts | ###HOSEPORTS### |
|---|---|
| Hydraulic Oil | ###HYDRAULICOIL### |
| HydraulicInputFlow | ###HYDRAULICINPUTFLOW### |
| HydraulicOperatingPressure | ###HYDRAULICOPERATINGPRESSURE### |