- General Dewatering
- Sand, Sludge and Slurry
- Hydraulic
- Solids Handling
- Corrosion Resistant
- High Temp (up to 200°F)
- Explosion Proof (FM Rated)
- MSHA Approved Pumps
- Accessories
- CSA-US Certification
- Case Studies
- Download Product Information & Literature Here
Hours of Operation:
M-F 8:15 - 5:00pm EST
Memorial Day: Closed Monday May 27, 2013
XP-SK Series
- Explosion Proof Electric Submersible Pumps with Shredder Action Impellers for use in Class 1, Division 1, Groups C & D Hazardous Locations
XP-SK Series
The Shredder (SK & XP-SK) pumps leave solids slightly larger than if passed through a grinder pump. The shredding action is caused by using a cutting impeller with a Tungsten Carbide Tip, against a "spiral" shaped diffuser plate.
- Shredder Pump - with FM Approved motor for use in Class 1, Division 1, Groups C & D hazardous locations. Available in 208, 230, 460 or 575 Volt 60Hz. Contact factory for 50Hz availability.
- Longer Power Cord – Standard 33ft. power.
- Epoxy Coated Motor Housing – Superior two part epoxy to protect the motor from exposure to the surrounding liquid.
- Three Seal Motor Protection - Motor is protected by two independent mechanical seals. Lower seal made of silicon carbide/silicon carbide and upper seal is made of carbon/ceramic. An additional lip seal has been installed to help prevent abrasives such as dirt, silt or sand, from entering into the seal chamber. Standard elastomers are Buna N (FKM optional).
- More Motor Protection – Air filled motor with winding protection and (NEMA) Class F motor insulation. Seal leakage detector(s) in seal chamber offers early warning should water enter the chamber.
- Tough Pump Construction – Hardened cast iron stands up to rough handling and pumping sandy water unlike pumps with soft resin impellers or plastic exterior components.
For product brochure, operational manual or dimensions please go to Product Information & Literature
| Model | Motor Rating HP |
Voltage | Rated Amps | Discharge Connection | Max Solids |
Max Head | Max GPM | Phase |
|---|---|---|---|---|---|---|---|---|
| XP-SK15C-208T | 2 | 208 | 6.6 | 3" NPT-M | 2.5" | 50' | 180 | 3 |
| XP-SK15C-230T | 2 | 230 | 6.2 | 3" NPT-M | 2.5" | 50' | 180 | 3 |
| XP-SK15C-460T | 2 | 460 | 3.1 | 3" NPT-M | 2.5" | 50' | 180 | 3 |
| XP-SK15C-575T | 2 | 575 | 2.5 | 3" NPT-M | 2.5" | 50' | 180 | 3 |
| XP-SK22C-208T | 3 | 208 | 9.4 | 3" NPT-M | 2.5" | 64' | 291 | 3 |
| XP-SK22C-230T | 3 | 230 | 8.9 | 3" NPT-M | 2.5" | 64' | 291 | 3 |
| XP-SK22C-460T | 3 | 460 | 4.5 | 3" NPT-M | 2.5" | 64' | 291 | 3 |
| XP-SK22C-575T | 3 | 575 | 3.6 | 3" NPT-M | 2.5" | 64' | 291 | 3 |
| XP-SK37C-208T | 5 | 208 | 15 | 3" NPT-M | 3" | 73' | 362 | 3 |
| XP-SK37C-230T | 5 | 230 | 13.9 | 3" NPT-M | 3" | 73' | 362 | 3 |
| XP-SK37C-460T | 5 | 460 | 7.0 | 3" NPT-M | 3" | 73' | 362 | 3 |
| XP-SK37C-575T | 5 | 575 | 5.6 | 3" NPT-M | 3" | 73' | 362 | 3 |
| XP-SK55C-208T | 7.5 | 208 | 21 | 4" NPT-F | 3.5" | 64' | 580 | 3 |
| XP-SK55C-230T | 7.5 | 230 | 19.4 | 4" NPT-F | 3.5" | 64' | 580 | 3 |
| XP-SK55C-460T | 7.5 | 460 | 9.7 | 4" NPT-F | 3.5" | 64' | 580 | 3 |
| XP-SK55C-575T | 7.5 | 575 | 7.8 | 4" NPT-F | 3.5" | 64' | 580 | 3 |
| XP-SK75C-230T | 10 | 230 | 25 | 4" NPT-F | 3.5" | 80' | 680 | 3 |
| XP-SK75C-460T | 10 | 460 | 12.6 | 4" NPT-F | 3.5" | 80' | 680 | 3 |
| XP-SK75C-575T | 10 | 575 | 10 | 4" NPT-F | 3.5" | 80' | 680 | 3 |
| XP-SK110C-230T | 15 | 230 | 35 | 6" FLANGE, ANSI | 3.5" | 92' | 870 | 3 |
| XP-SK110C-460T | 15 | 460 | 17.5 | 6" FLANGE, ANSI | 3.5" | 92' | 870 | 3 |
| XP-SK110C-575T | 15 | 575 | 14.9 | 6" FLANGE, ANSI | 3.5" | 92' | 870 | 3 |
| XP-SK150C-460T | 20 | 460 | 24 | 6" FLANGE, ANSI | 3.5" | 110' | 900 | 3 |
| XP-SK150C-575T | 20 | 575 | 19.2 | 6" FLANGE, ANSI | 3.5" | 110' | 900 | 3 |
