Hours of Operation: 

M-F 8:15am - 5:00pm EST
CLOSED for Christmas
Mon., Dec. 25th & Tues., Dec. 26th


 

RAD-AX® SKG Series Submersible Pumps
Awarded Breakthrough Product of the Year, 2016
Presented By: Processing Magazine

_______________________________________________________________

See us at:

UCT (Underground Construction Technology) 
Jan. 30-Feb. 1, 2018
Booth #410 - Morial Convention Center
New Orleans, LA

WEFTEC
Oct. 1-3, 2018
Booth #1901 - Morial Convention Center 
New Orleans, LA

Follow us on LinkedIn

 


SKF Series

CAST IRON:

Shredder Pumps

 
The Shredder (SKF) pumps leave solids slightly larger than if passed through a grinder pump. The shredding action is caused by using a cutting impeller with a Tungsten Carbide Tip, against a "spiral" shaped diffuser plate.
ALSO AVAILABLE IN 316 CAST STAINLESS STEEL (SKXF-Series)
  • Longer Power Cord – Standard 33ft. power.
  • 304SS Motor Housing – Superior abrasion resistance will not wear out like aluminum motor housings when pumping sandy water.
  • Three Seal Motor Protection - Motor is protected by double mechanical seals. Lower seal made of silicon carbide/silicon carbide and upper seal is made of carbon/ceramic. An additional lip seal has been installed above the impeller, to help prevent abrasives such as dirt, silt or sand, from entering into the seal chamber.
  • More Motor Protection – Winding protection and (NEMA) Class R motor insulation with a thermal cut out switch that will allow the stator to have a winding temperature of up to 300 degrees F (150 C), superior to pumps with Class A and B insulation.
  • Tough Pump Construction – Hardened cast iron stands up to rough handling and pumping sandy water unlike pumps with soft resin impellers or plastic exterior components.

(Specifications dependent on model & may change without notice)

For product brochure, operational manual or dimensions please go to Product Information & Literature

Model Motor
Rating HP
Voltage Rated Amps Discharge Connection Max
Solids
Max Head Max GPM Phase
SK1500CF-230 2 230163" NPT-M 1.6" 40.8'220 1
SK08CF-208T 1 2083.52" NPT-M 2" 48'95 3
SK08CF-230T 1 2303.22" NPT-M 2" 48'95 3
SK08CF-460T 1 4601.62" NPT-M 2" 48'95 3
SK08CF-575T 1 5751.32" NPT-M 2" 48'95 3
SK15CF-208T 2 2086.33" NPT-M 1.6" 42'220 3
SK15CF-230T 2 23063" NPT-M 1.6" 42'220 3
SK15CF-460T 2 46033" NPT-M 1.6" 42'220 3
SK15CF-575T 2 5752.33" NPT-M 1.6" 42'220 3
SK22CF-208T 3 2089.453" NPT-M 1.6" 45'270 3
SK22CF-230T 3 23093" NPT-M 1.6" 45'270 3
SK22CF-460T 3 4604.53" NPT-M 1.6" 45'270 3
SK22CF-575T 3 5753.23" NPT-M 1.6" 45'270 3
SK37CF-208T 5 20814.73" FLANGE W/ 4" NPT-F DISCHARGE 1.6" 62'360 3
SK37CF-230T 5 230143" FLANGE W/ 4" NPT-F DISCHARGE 1.6" 62'360 3
SK37CF-460T 5 46073" FLANGE W/ 4" NPT-F DISCHARGE 1.6" 62'360 3
SK37CF-575T 5 5755.53" FLANGE W/ 4" NPT-F DISCHARGE 1.6" 62'360 3
SK55CF-230T 7.5 230214" NPT-F 3.5" 54'570 3
SK55CF-460T 7.5 46010.54" NPT-F 3.5" 54'570 3
SK55CF-575T 7.5 5757.84" NPT-F 3.5" 54'570 3
SK75CF-460T 10 460154" NPT-F 3.5" 64'670 3
SK75CF-575T 10 57510.54" NPT-F 3.5" 64'670 3
SK110CF-460T 15 46019.86" FLANGE,ANSI 3.5" 94'845 3
SK110CF-575T 15 57513.76" FLANGE,ANSI 3.5" 94'845 3
SK150CF-460T 20 46025.76" FLANGE,ANSI 3.5" 101'911 3
SK150CF-575T 20 57519.86" FLANGE,ANSI 3.5" 101'911 3