S Series

 Electric Submersible Pumps with Single Vane Impellers for Municipal, Industrial and Agricultural Waste-Water

The S-pumps have non-clog, single vane impellers designed for high volume and lift performance.

ALSO AVAILABLE IN 316 CAST STAINLESS STEEL (SX-Series)

• Longer Power Cord – Standard 33ft. power cord.

• 304SS Motor Housing – Superior abrasion resistance will not wear out like aluminum motor housings when pumping sandy water.

• Three Seal Motor Protection - Motor is protected by double mechanical seals. Lower seal made of silicon carbide/silicon carbide and upper seal is made of carbon/ceramic. An additional lip seal has been installed above the impeller, to help prevent abrasives such as dirt, silt or sand, from entering into the seal chamber.

• More Motor Protection – Winding protection and (NEMA) Class F motor insulation allows motor temperature to raise to 230°F, superior to pumps with Class A and B insulation. Automatic switch turns pump motor off if temperature and/or amp draw raises too high. When the motor cools the switch will automatically reset and the pump will turn back on.

• Tough Pump Construction – Hardened cast iron stands up to rough handling and pumping sandy water unlike pumps with soft resin impellers or plastic exterior components.

 (Specifications dependent on model & may change without notice)

For product brochure, operational manual or dimensions please go to Product Information & Literature