Hours of Operation: 

M-F 8:15am - 5:00pm EST
CLOSED for Christmas
Mon., Dec. 25th & Tues., Dec. 26th


 

RAD-AX® SKG Series Submersible Pumps
Awarded Breakthrough Product of the Year, 2016
Presented By: Processing Magazine

_______________________________________________________________

See us at:

UCT (Underground Construction Technology) 
Jan. 30-Feb. 1, 2018
Booth #410 - Morial Convention Center
New Orleans, LA

WEFTEC
Oct. 1-3, 2018
Booth #1901 - Morial Convention Center 
New Orleans, LA

Follow us on LinkedIn

 


SK Series

 

Electric Submersible Pumps with Shredder Action Impellers for Municipal, Industrial and Agricultural Waste-Water

 


The Shredder (SK) pumps leave solids slightly larger than if passed through a grinder pump. The shredding action is caused by using a cutting impeller with a Tungsten Carbide Tip, against a "spiral" shaped diffuser plate.
NEW PRODUCT: Explosion Proof Shredder Pump! Need explosion proof pumps for use in Class 1, Division 1, Groups C & D Hazardous Locations: CLICK HERE!
ALSO AVAILABLE IN 316 CAST STAINLESS STEEL (SKX-Series)
  • Longer Power Cord – Standard 33ft. power.
  • 304SS Motor Housing – Superior abrasion resistance will not wear out like aluminum motor housings when pumping sandy water.
  • Three Seal Motor Protection - Motor is protected by double mechanical seals. Lower seal made of silicon carbide/silicon carbide and upper seal is made of carbon/ceramic. An additional lip seal has been installed above the impeller, to help prevent abrasives such as dirt, silt or sand, from entering into the seal chamber.
  • More Motor Protection – Winding protection and (NEMA) Class F motor insulation allows motor temperature to raise to 230°F, superior to pumps with Class A and B insulation. Automatic switch turns pump motor off if temperature and/or amp draw raises too high. When the motor cools the switch will automatically reset and the pump will turn back on.
  • Tough Pump Construction – Hardened cast iron stands up to rough handling and pumping sandy water unlike pumps with soft resin impellers or plastic exterior components.

    (Specifications dependent on model & may change without notice)

    For product brochure, operational manual or dimensions please go to Product Information & Literature

Model Motor
Rating HP
Voltage Rated Amps Discharge Connection Max
Solids
Max Head Max GPM Phase
SK1500C-230 2 230143" NPT-M 1.6" 40.8'220 1
SK08C-208T 1 2083.52" NPT-M 2" 48'95 3
SK08C-230T 1 2303.22" NPT-M 2" 48'95 3
SK08C-460T 1 4601.62" NPT-M 2" 48'95 3
SK08C-575T 1 5751.32" NPT-M 2" 48'95 3
SK15C-208T 2 2086.33" NPT-M 1.6" 42'220 3
SK15C-230T 2 23063" NPT-M 1.6" 42'220 3
SK15C-460T 2 46033" NPT-M 1.6" 42'220 3
SK15C-575T 2 5752.33" NPT-M 1.6" 42'220 3
SK22C-208T 3 2089.453" NPT-M 1.6" 45'270 3
SK22C-230T 3 23093" NPT-M 1.6" 45'270 3
SK22C-460T 3 4604.53" NPT-M 1.6" 45'270 3
SK22C-575T 3 5753.23" NPT-M 1.6" 45'270 3
SK37C-208T 5 20814.73" flange w/ 4" NPT-F discharge (3" NPT-M optional) 1.6" 62'360 3
SK37C-230T 5 230143" flange w/ 4" NPT-F discharge (3" NPT-M optional) 1.6" 62'360 3
SK37C-460T 5 46073" flange w/ 4" NPT-F discharge (3" NPT-M optional) 1.6" 62'360 3
SK37C-575T 5 5755.53" flange w/ 4" NPT-F discharge (3" NPT-M optional) 1.6" 62'360 3
SK55C-230T 7.5 230214" NPT-F 3.5" 54'570 3
SK55C-460T 7.5 46010.54" NPT-F 3.5" 54'570 3
SK55C-575T 7.5 5757.84" NPT-F 3.5" 54'570 3
SK75C-460T 10 460154" NPT-F 3.5" 64'670 3
SK75C-575T 10 57510.54" NPT-F 3.5" 64'670 3
SK110C-460T 15 46019.86" FLANGE, ANSI 3.5" 94'845 3
SK110C-575T 15 57513.76" FLANGE, ANSI 3.5" 94'845 3
SK150C-460T 20 46025.76" FLANGE, ANSI 3.5" 101'911 3
SK150C-575T 20 57519.86" FLANGE, ANSI 3.5" 101'911 3