SXF Series:

316 STAINLESS STEEL:
SXF – Solids Handling Pumps

316 Cast Stainless Steel Pumps with Single Vane or Double Vane Impellers for Municipal, Industrial and Agricultural Waste-Water

Side discharge and non-clog single vane impellers for the passing of solids while delivering high volume of liquid.

SXF Series The SXF-pumps have non-clog, single vane impellers designed for high volume and lift performance.

All wear and "wet" parts such as impeller, wear-plate, oil housing, pump-housing and inner pump top are made of Cast 316 stainless material. The elastomers such as o-rings, lip seals and gaskets are made of Viton ®.

• All parts exposed to pumped liquids are made of 316 Stainless Steel.
• Elastomers are made of Viton®.
• Longer Power Cord – Standard 33ft. power cord.
• Three Seal Motor Protection - Motor is protected by double mechanical seals. Lower seal made of silicon carbide/silicon carbide and upper seal is made of carbon/ceramic. An additional lip seal has been installed above the impeller, to help prevent abrasives such as dirt, silt or sand, from entering into the seal chamber.
• More Motor Protection – Winding protection and (NEMA) Class F motor insulation allows motor temperature to raise to 230°F, superior to pumps with Class A and B insulation.

Each pump is tested at factory, both for performance as well as safety. Level controls and level control systems are available.

(Specifications dependent on model & may change without notice)

Viton® is a registered trademark of DuPont Dow Elastomers