Hours of Operation: 

M-F 8:15am - 5:00pm EST
CLOSED for Christmas
Mon., Dec. 25th & Tues., Dec. 26th


 

RAD-AX® SKG Series Submersible Pumps
Awarded Breakthrough Product of the Year, 2016
Presented By: Processing Magazine

_______________________________________________________________

See us at:

UCT (Underground Construction Technology) 
Jan. 30-Feb. 1, 2018
Booth #410 - Morial Convention Center
New Orleans, LA

WEFTEC
Oct. 1-3, 2018
Booth #1901 - Morial Convention Center 
New Orleans, LA

Follow us on LinkedIn

 


JX Series

316 Cast Stainless Steel Pumps

Side discharge submersibles are typically used in sump applications where the liquid level can be controlled and where the pumps are partially submerged when in operation. The JX models are designed for general pumping purposes where the passing or shredding of larger solids is not required.
JX pumps are available in size 0.5 to 10 HP. Single-phase versions are from 0.5 to 2 HP 50 Hz models can be ordered at the same low price as 60Hz. Dual mechanical seals with the lower seal made of highly wear resistant Sic/Sic, for less downtime and long life.
All "wet parts" are of highest quality 316 stainless steel. Wear parts are made of Cast material. The 0.5 to 5 H.P. JX pumps are made with PrecisionCast Parts (also referred to as Investment Castings), the same quality that is used in aircraft and space vehicles due to it's superior density and strength. Other models are manufactured with sand cast parts.
Elastomers such as gaskets and o-rings are made of FKM.
Standard power cable is made of oil resistant quality, which works very well in most environments. EPDM quality cable and elastomers as well as BUNA elastomers are available on special order.
  • All metal parts exposed to pumped liquids are made of 316 Stainless Steel.
  • Elastomers are made of FKM.
  • Longer Power Cord – Standard 33ft. power cord.
  • Three Seal Motor Protection - Motor is protected by double mechanical seals. Lower seal made of silicon carbide/silicon carbide and upper seal is made of carbon/ceramic. An additional lip seal has been installed above the impeller, to help prevent abrasives such as dirt, silt or sand, from entering into the seal chamber.
  • More Motor Protection – Winding protection and (NEMA) Class F motor insulation allows motor temperature to raise to 230°F, superior to pumps with Class A and B insulation. Automatic switch turns pump motor off if temperature and/or amp draw raises too high. When the motor cools the switch will automatically reset and the pump will turn back on.
  • JX55SS and JX75SS MODELS - The 7.5 and 10 HP models are designed with an outer sleeve on the impeller shaft. Two oil seal rings, upper and lower, rides on this replaceable shaft which prevents the formation of grooves on the impeller shaft itself.
  • TWO PUMPS IN ONE - Most sizes can be converted to a high head version by merely changing the impeller and the suction plate. Other brands often require major changes to achieve different heads or volumes.
  • SLIDE RAIL SYSTEMS
    The JX55SS and JX75SS models can also be mounted on BJM slide rail systems.
Each pump is tested at factory, both for performance as well as safety. Level controls and level control systems are available.

 (Specifications dependent on model & may change without notice)

 For product brochure, operational manual or dimensions please go to Product Information & Literature

Model Motor
Rating HP
Voltage Rated Amps Discharge Connection Max
Solids
Max Head Max GPM Phase
JX400SS-115 0.5 1157.62" NPT-M 1/8" 35'66 1
JX400SS-230 0.5 2303.82" NPT-M 1/8" 35'66 1
JX750SS-115 1 115142" NPT-M 3/16" 50'91 1
JX750SS-230 1 23072" NPT-M 3/16" 50'91 1
JX08SS-208T 1 2083.52" NPT-M 3/16" 50'91 3
JX08SS-230T 1 2303.22" NPT-M 3/16" 50'91 3
JX08SS-460T 1 4601.62" NPT-M 3/16" 50'91 3
JX08SS-575T 1 5751.32" NPT-M 3/16" 50'91 3
JX15SS-208T 2 2086.33" NPT-M 3/16" 60'158 3
JX15SS-230T 2 23063" NPT-M 3/16" 60'158 3
JX15SS-460T 2 46033" NPT-M 3/16" 60'158 3
JX15SS-575T 2 5752.33" NPT-M 3/16" 60'158 3
JX22SS-208T 3 2089.453" NPT-M 3/8" 75'237 3
JX22SS-230T 3 23093" NPT-M 3/8" 75'237 3
JX22SS-460T 3 4604.53" NPT-M 3/8" 75'237 3
JX22SS-575T 3 5753.23" NPT-M 3/8" 75'237 3
JX37SS-208T 5 20814.74" NPT-F (3" NPT-M optional) 3/8" 95'264 3
JX37SS-230T 5 230144" NPT-F (3" NPT-M optional) 3/8" 95'264 3
JX37SS-460T 5 46074" NPT-F (3" NPT-M optional) 3/8" 95'264 3
JX37SS-575T 5 5755.54" NPT-F (3"NPT-M optional) 3/8" 95'264 3
JX55CSS-230T 7.5 230214" NPT-F 3/8" 91'515 3
JX55CSS-460T 7.5 46010.54" NPT-F 3/8" 91'515 3
JX55CSS-575T 7.5 5757.64" NPT-F 3/8" 91'515 3
JX75CSS-460T 10 460154" NPT-F 3/8" 110'647 3
JX75CSS-575T 10 57510.54" NPT-F 3/8" 110'647 3