Perfecta Series

Ideal for pumping everything from contaminated, dirty water, corrosive liquids to light dewatering.

Used in the following U.S. industries:
Metal Plating, Salt Mining, Plumbing, Marine, Agriculture, Aquaculture, Chemical, Rental, Utilities and Fire Departments.

• Virtually unbreakable

• Compact and lightweight. Only 13.5 Lbs.

• Never rusts. Excellent resistance against acids, alkalis.

• Two discharge ports. 1 1/4" inside threaded connection and one 1 1/2" tapered hose connection delivered with each pump.

• Thermal breaker incorporated in motor windings shuts off power before over-heating occurs due to locked rotor or long periods of running dry (150°C). For permanent installation temperature should not to exceed 135°F. For intermittent use submerge less than 20 min. in 195°F maximum.

The GF32-9 and IGF32-9 comes equipped with a fully automatic on/off level switch as standard. The pump is easily installed in a sump. The Perfecta® Pump for safeguarding vaults, emptying tanks or pumping out ponds. The unique dual port design virtually eliminates kinks in your hose; use vertical port for deep/narrow places or use the horizontal port for shallow/wide applications.

Not for use in flammable liquids! Consult chemical resistance chart for compatibility between pump materials and liquid before operating pump.

Note: Seal Minder® option not available on the Perfecta® Pump Series pumps.

(Specifications dependent on model & may change without notice)

For product brochure, operational manual or dimensions please go to Product Information & Literature