Hours of Operation: 

M-F 8:15am - 5:00pm EST 


RAD-AX® SKG Series Submersible Pumps
Awarded Breakthrough Product of the Year, 2016
Presented By: Processing Magazine


See us at:

Oct. 1-3, 2018
Booth #1901 - Morial Convention Center 
New Orleans, LA

Follow us on LinkedIn


S Series

 Electric Submersible Pumps with Single Vane Impellers for Municipal, Industrial and Agricultural Waste-Water


The S-pumps have non-clog, single vane impellers designed for high volume and lift performance.
  • Longer Power Cord – Standard 33ft. power cord.
  • 304SS Motor Housing – Superior abrasion resistance will not wear out like aluminum motor housings when pumping sandy water.
  • Three Seal Motor Protection - Motor is protected by double mechanical seals. Lower seal made of silicon carbide/silicon carbide and upper seal is made of carbon/ceramic. An additional lip seal has been installed above the impeller, to help prevent abrasives such as dirt, silt or sand, from entering into the seal chamber.
  • More Motor Protection – Winding protection and (NEMA) Class F motor insulation allows motor temperature to raise to 230°F, superior to pumps with Class A and B insulation. Automatic switch turns pump motor off if temperature and/or amp draw raises too high. When the motor cools the switch will automatically reset and the pump will turn back on.
  • Tough Pump Construction – Hardened cast iron stands up to rough handling and pumping sandy water unlike pumps with soft resin impellers or plastic exterior components.

 (Specifications dependent on model & may change without notice)

For product brochure, operational manual or dimensions please go to Product Information & Literature

Model Motor
Rating HP
Voltage Rated Amps Discharge Connection Max
Max Head Max GPM Phase
S55C-230T 7.5 230214" NPT-F 2.5" 78'450 3
S55C-460T 7.5 46010.54" NPT-F 2.5" 78'450 3
S55C-575T 7.5 5757.64" NPT-F 2.5" 78'450 3
S75C-460T 10 460154" NPT-F 2.5" 99'590 3
S75C-575T 10 57510.54" NPT-F 2.5" 99'590 3