- General Dewatering
- Sand, Sludge and Slurry
- Hydraulic
- Solids Handling
- Corrosion Resistant
- High Temp (up to 200°F)
- Explosion Proof (FM Rated)
- MSHA Approved Pumps
- Accessories
- CSA-US Certification
- Case Studies
- Download Product Information & Literature Here
Summer Hours of Operation:
M-T 8:15 - 5:00pm EST
Friday 7:15 - 4:00pm EST
Closed:
Independence Day
Thurs. & Fri. July 4-5, 2013
J1500F-230
- handles liquids up to 200 degrees F.- Cast Iron Pumps
- Complete with Control Box:
- All Single Phase Fahrenheit Pumps are supplied with NEMA 4X control box - including start components
- Single Phase "F" Series Control Box Standard Features:
- Name 4X Enclosure with Hinged Door and lockable hasp
- Terminal Blocks and Ground lugs as required
- Seal Fail Indicator light
- Seal Minder Relay
- IEC Rated Motor Contactor
- On / Off toggle switch
- Back Panel and Inner Door
- Incoming Power Block
- U.L 508 listed
- Control and Alarm Circuit Fuses
- Pump Start Components
- Piezo Audible Alarm
- Motor Thermal Sensor Relay
(Specifications dependent on model & may change without notice)
| MAX. FLOW: GPM | 158 |
|---|---|
| MAX. HEAD: ft | 60' |
| PUMP TYPE | Sump, Side Discharge |
| STRAINER OPENING | 0.5625" x 0.25" Slot |
| DISCHARGE SIZE | 3" NPT-M |
| DISCHARGE CONNECTION | ###TX_EXBJMPUMPSPRODUCTS_DISCHARGECONNECTION### |
| MAX. SUBMERGED DEPTH | 65' |
| MIN. SUBMERGED DEPTH | 10.5" |
| SHIPPING WEIGHT:lbs | 84 |
| MOTOR CASING | 304SS |
|---|---|
| PUMP VOLUTE | Cast Iron |
| IMPELLER - MULTI VANE | Cast Iron |
| STRAINER / STAND | ###STAND### |
| LIP SEALS & O-RINGS | Buna - N |
| ROTOR SHAFT | 304SS |
| EXTERNAL HARDWARE | 304SS |
| QTY. OIL IN SEAL CHAMBER | 9 U.S. FL. OZ.SHELL FM 32, NSF APPROVED |
| QTY. OIL IN MOTOR STATOR | OIL-FILLED W/ SHELL FM 32, NSF APPROVED |
| PUMPTOPCOVER | ###TX_EXBJMPUMPSPRODUCTS_PUMPTOPCOVER### |
| PUMP HANDLE | ###TX_EXBJMPUMPSPRODUCTS_PUMPHANDLE### |
| MOTOR RATING: HP | 2 |
|---|---|
| MOTOR RPM | 3450 |
| MOTOR INSULATION CLASS | R |
| MOTOR SERVICE FACTOR | 1.1 |
| VOLTAGE | 230, 1ph-60 Hz |
| CURRENT F.L.A. | 14 |
| MOTOR PROTECTION | Thermal Sensor Switches Embedded in Each Winding Phase |
| POWER CORD: GAGE; LENGTH | A.W.G. 14/4, 50',high temp. rated |
| MAXIMUM LIQUID TEMPERATURE | 200° F |
| Seal Minder® | Standard |
| HousePorts | ###HOSEPORTS### |
|---|---|
| Hydraulic Oil | ###HYDRAULICOIL### |
| HydraulicInputFlow | ###HYDRAULICINPUTFLOW### |
| HydraulicOperatingPressure | ###HYDRAULICOPERATINGPRESSURE### |