Pumps >> Corrosion Resistant >> Perfecta Series >>TIGF32-9NL

TIGF32-9NL

The Perfecta® Pump for corrosive environments

Made of super tough Noryl material, Titanium shaft & fasteners, FKM elastomers and an EPDM power cord.

NL = manual operation.

Not for use in flammable liquids! Consult chemical resistance chart for compatibility between pump materials and liquid before operating pump.

Note: Seal Minder® option not available on the Perfecta® Pump-Series pumps.

(Specifications dependent on model & may change without notice)

GENERAL DATA
MAX. FLOW: GPM 46
MAX. HEAD: ft 27'
PUMP TYPE Top or Side Discharge, Chemical Resistant
STRAINER OPENING 0.25
DISCHARGE SIZE 1-1/4" NPT-F and 1-1/2" Tapered Hose
DISCHARGE CONNECTION ###TX_EXBJMPUMPSPRODUCTS_DISCHARGECONNECTION###
MAX. SUBMERGED DEPTH 33'
MIN. SUBMERGED DEPTH 3.5"
SHIPPING WEIGHT:lbs 17

CONSTRUCTION/MATERIAL DATA
MOTOR CASING ###MOTORHOUSING###
PUMP VOLUTE ###PUMPVOLUTE###
IMPELLER - MULTI VANE Noryl GTX830
STRAINER / STAND ###STAND###
LIP SEALS & O-RINGS ###LIPSEALORINGS###
ROTOR SHAFT Titanium
EXTERNAL HARDWARE Titanium & Titanium putty covered 316SS
QTY. OIL IN SEAL CHAMBER ###QTYOILSEALCHAMBER###
QTY. OIL IN MOTOR STATOR ###QTYOILMOTORSTATOR###
PUMPTOPCOVER Ultramid B3 WG7
PUMP HANDLE Polypropylene

ELECTRICAL/MOTOR DATA
MOTOR RATING: HP 0.4
MOTOR RPM 3450
MOTOR INSULATION CLASS F
MOTOR SERVICE FACTOR 1.1
VOLTAGE 115, 1PH-60Hz
CURRENT F.L.A. 5
MOTOR PROTECTION Thermal Breaker, 150° C
POWER CORD: GAGE; LENGTH A.W.G. 16/3; 15', EPDM
MAXIMUM LIQUID TEMPERATURE 135°F - Continuous Duty 195°F - Intermittent use submerge less than 20 minutes
Seal Minder® Not Available

HYDRAULIC DATA
HousePorts ###HOSEPORTS###
Hydraulic Oil ###HYDRAULICOIL###
HydraulicInputFlow ###HYDRAULICINPUTFLOW###
HydraulicOperatingPressure ###HYDRAULICOPERATINGPRESSURE###

Download Data Sheet & Performance Curve