- General Dewatering
- Sand, Sludge and Slurry
- Hydraulic
- Solids Handling
- Corrosion Resistant
- High Temp (up to 200°F)
- Explosion Proof (FM Rated)
- MSHA Approved Pumps
- Accessories
- CSA-US Certification
- Case Studies
- Download Product Information & Literature Here
Hours of Operation:
M-F 8:15 - 5:00pm EST
Memorial Day: Closed Monday May 27, 2013
RX08SS-575T
- Top Discharge 316 Cast Stainless Steel Pumps
- The Bullet® pumps (1HP) are ideal for dewatering construction sites, mines, circulating fountain water, or for all around use in industrial plants and utilities.
- Recommended accessories:
- Manual Starter Box:
- Manual On/Off starter box for RX08SS-208 = BJM Item # 201137
- Manual On/Off starter box for RX08SS-230 = BJM Item # 201137
- Manual On/Off starter box for RX08SS-460 = BJM Item # 201117
- Manual On/Off starter box for RX08SS-575 = BJM Item # 201117
- Auto Starter Box:
- Auto On/Off starter box for RX08SS-208 = BJM Item # 201138
- Auto On/Off starter box for RX08SS-230 = BJM Item # 201138
- Auto On/Off starter box for RX08SS-460 = BJM Item # 201118
- Auto On/Off starter box for RX08SS-575 = BJM Item # 201118
- Simplex Control Panel - (3 mechanical float switches):
- Three Phase control Panel for RX08SS-208 = BJM Item # 201080
- Three Phase control Panel for RX08SS-230 = BJM Item # 201080
- Three Phase control Panel for RX08SS-460 = BJM Item # 201076
- Three Phase control Panel for RX08SS-575 = BJM Item # 201076
- Duplex Control Panel - (4 mechanical float switches):
- Three Phase control Panel for RX08SS-208 = BJM Item # 201091
- Three Phase control Panel for RX08SS-230 = BJM Item # 201091
- Three Phase control Panel for RX08SS-460 = BJM Item # 201087
- Three Phase control Panel for RX08SS-575 = BJM Item # 201087
- Special installation can be made with EPDM power-cable and elastomers. Contact factory or nearest distributor for details. (BUNA (Nitril) also available).
(Specifications dependent on model & may change without notice)
| MAX. FLOW: GPM | 89 |
|---|---|
| MAX. HEAD: ft | 49' |
| PUMP TYPE | Top Discharge, Dewatering |
| STRAINER OPENING | 0.25" |
| DISCHARGE SIZE | 2" NPT-M |
| DISCHARGE CONNECTION | ###TX_EXBJMPUMPSPRODUCTS_DISCHARGECONNECTION### |
| MAX. SUBMERGED DEPTH | 65' |
| MIN. SUBMERGED DEPTH | ###MINSUBDEPTH### |
| SHIPPING WEIGHT:lbs | 64 |
| MOTOR CASING | 316SS |
|---|---|
| PUMP VOLUTE | 316SS |
| IMPELLER - MULTI VANE | 316SS |
| STRAINER / STAND | ###STAND### |
| LIP SEALS & O-RINGS | FKM |
| ROTOR SHAFT | 316SS |
| EXTERNAL HARDWARE | 316SS |
| QTY. OIL IN SEAL CHAMBER | 4.4 U.S. FL. OZ. |
| QTY. OIL IN MOTOR STATOR | ###QTYOILMOTORSTATOR### |
| PUMPTOPCOVER | ###TX_EXBJMPUMPSPRODUCTS_PUMPTOPCOVER### |
| PUMP HANDLE | ###TX_EXBJMPUMPSPRODUCTS_PUMPHANDLE### |
| MOTOR RATING: HP | 1 |
|---|---|
| MOTOR RPM | 3450 |
| MOTOR INSULATION CLASS | F |
| MOTOR SERVICE FACTOR | 1.1 |
| VOLTAGE | 208/230/460/575, 3PH-60Hz |
| CURRENT F.L.A. | 1.3 |
| MOTOR PROTECTION | Thermal & Amp Overload |
| POWER CORD: GAGE; LENGTH | A.W.G. 16/4; 50', STOW |
| MAXIMUM LIQUID TEMPERATURE | 104° F |
| Seal Minder® | Not Available |
| HousePorts | ###HOSEPORTS### |
|---|---|
| Hydraulic Oil | ###HYDRAULICOIL### |
| HydraulicInputFlow | ###HYDRAULICINPUTFLOW### |
| HydraulicOperatingPressure | ###HYDRAULICOPERATINGPRESSURE### |