- General Dewatering
- Sand, Sludge and Slurry
- Hydraulic
- Solids Handling
- Corrosion Resistant
- High Temp (up to 200°F)
- Explosion Proof (FM Rated)
- MSHA Approved Pumps
- Accessories
- CSA-US Certification
- Case Studies
- Download Product Information & Literature Here
Summer Hours of Operation:
M-T 8:15 - 5:00pm EST
Friday 7:15 - 4:00pm EST
Closed:
Independence Day
Thurs. & Fri. July 4-5, 2013
S55CF-230T
- handles liquids up to 200 degrees F.
- Cast Iron pumps with Shredder Action Impellers for Municipal, Industrial and Agricultural Waste-Water
- The S55CF and S75CF models have a removable discharge and are able to be mounted on BJM slide rail systems.
- Recommended accessories:
- Simplex Control Panel:
- Three Phase control Panel for S55CF-208 = BJM Part# AP31BS
- Three Phase control Panel for S55CF-230 = BJM Part# AP31AS
- Three Phase control Panel for S55CF-460 = BJM Part# AP31GH
- Three Phase control Panel for S55CF-575 = BJM Part# AP31FH
- Duplex Control Panel:
- Three Phase control Panel for S55CF-208 = BJM Part# AP32BS
- Three Phase control Panel for S55CF-230 = BJM Part# AP32AS
- Three Phase control Panel for S55CF-460 = BJM Part# AP32GH
- Three Phase control Panel for S55CF-575 = BJM Part# AP32FH
- Slide Rails:
Note: Seal Minder relay and high temperature floats must be ordered for panels being used with high temperature pumps. Heat sensor connectors are standard on all panels.
SEAL MINDER: comes standard with the F-Series pumps.
- 4” Cast Iron Slide Rail: BJM Part# SR100-ANSI
- 4” 316SS Slide Rail: BJM Part# SRX100SS-ANSI
- Note: BJM Adapter kits (sold separately) are needed to fit pumps onto the following slide rails:
- 6” Cast Iron Slide Rail: BJM Part# SR150-ANSI
- 6” 316SS Slide Rail: BJM Part# SRX150SS-ANSI
Special installation can be made with EPDM power-cable and elastomers. Contact factory or nearest distributor for details. (BUNA (Nitril) also available).
- (Specifications dependent on model & may change without notice)
| MAX. FLOW: GPM | 450 |
|---|---|
| MAX. HEAD: ft | 78' |
| PUMP TYPE | Open Vane Non Clog |
| STRAINER OPENING | ###STRAINEROPENING### |
| DISCHARGE SIZE | 4" NPT-F |
| DISCHARGE CONNECTION | ###TX_EXBJMPUMPSPRODUCTS_DISCHARGECONNECTION### |
| MAX. SUBMERGED DEPTH | 65' |
| MIN. SUBMERGED DEPTH | ###MINSUBDEPTH### |
| SHIPPING WEIGHT:lbs | 247 |
| MOTOR CASING | 304SS |
|---|---|
| PUMP VOLUTE | Cast Iron |
| IMPELLER - MULTI VANE | ###IMPELLERMULTIVANE### |
| STRAINER / STAND | Cast Iron |
| LIP SEALS & O-RINGS | FKM |
| ROTOR SHAFT | 304SS |
| EXTERNAL HARDWARE | 304SS |
| QTY. OIL IN SEAL CHAMBER | 35.5 U.S. FL. OZ., SHELL FM 32, NSF APPROVED |
| QTY. OIL IN MOTOR STATOR | OIL-FILLED W/ SHELL FM 32, NSF APPROVED |
| PUMPTOPCOVER | ###TX_EXBJMPUMPSPRODUCTS_PUMPTOPCOVER### |
| PUMP HANDLE | ###TX_EXBJMPUMPSPRODUCTS_PUMPHANDLE### |
| MOTOR RATING: HP | 7.5 |
|---|---|
| MOTOR RPM | 3450 |
| MOTOR INSULATION CLASS | R |
| MOTOR SERVICE FACTOR | 1.1 |
| VOLTAGE | 208/230/460/575, 3PH-60 Hz |
| CURRENT F.L.A. | 21 |
| MOTOR PROTECTION | Thermal Sensor Switches Embedded in Each Winding Phase |
| POWER CORD: GAGE; LENGTH | A.W.G. 10/4; 33', high temp. rated |
| MAXIMUM LIQUID TEMPERATURE | 200°F |
| Seal Minder® | STANDARD |
| HousePorts | ###HOSEPORTS### |
|---|---|
| Hydraulic Oil | ###HYDRAULICOIL### |
| HydraulicInputFlow | ###HYDRAULICINPUTFLOW### |
| HydraulicOperatingPressure | ###HYDRAULICOPERATINGPRESSURE### |