JX Series

Side discharge submersibles are typically used in sump applications where the liquid level can be controlled and where the pumps are partially submerged when in operation. The JX models are designed for general pumping purposes where the passing or shredding of larger solids is not required. JX pumps are available in size 0.5 to 10 HP. Single-phase versions are from 0.5 to 2 HP 50 Hz models can be ordered at the same low price as 60Hz. Dual mechanical seals with the lower seal made of highly wear resistant Sic/Sic for less downtime and long life. All "wet parts" are of highest quality 316 stainless steel. Wear parts are made of cast material. The 0.5 to 5 H.P. JX pumps are made with precision cast parts (also referred to as investment castings), the same quality that is used in aircraft and space vehicles due to it's superior density and strength. Other models are manufactured with sand cast parts. Elastomers such as gaskets and o-rings are made of FKM. Standard power cable is made of oil resistant quality, which works very well in most environments. EPDM quality cable and elastomers as well as BUNA elastomers are available on special order.
View ModelsRequest Information
Download
Series Curves (PDF)
  • All metal parts exposed to pumped liquids are made of 316 stainless steel.
  • Elastomers are made of FKM.
  • Longer Power Cord – Standard 33ft. power cord.
  • Three Seal Motor Protection – Motor is protected by double mechanical seals. Lower seal made of silicon carbide/silicon carbide and upper seal is made of carbon/ceramic. An additional lip seal has been installed above the impeller to help prevent abrasives such as dirt, silt or sand from entering into the seal chamber.
  • More motor protection – Winding protection and (NEMA) Class F motor insulation allows motor temperature to raise to 230°F, superior to pumps with Class A and B insulation. Automatic switch turns pump motor off if temperature and/or amp draw raises too high. When the motor cools the switch will automatically reset and the pump will turn back on.
  • JX55SS and JX75SS MODELS – The 7.5 and 10 HP models are designed with an outer sleeve on the impeller shaft. Two oil seal rings, upper and lower, ride on this replaceable shaft which prevents the formation of grooves on the impeller shaft itself.
  • TWO PUMPS IN ONE – Most sizes can be converted to a high head version by merely changing the impeller and the suction plate. Other brands often require major changes to achieve different heads or volumes.
  • Slide Rail Systems – The JX55SS and JX75SS models can also be mounted on BJM slide rail systems.
  • Each pump is tested at factory, both for performance as well as safety. Level controls and level control systems are available.
  • Specifications dependent on model and may change without notice.
  • Sales Brochure
  • Operation Manual
  • Pump Dimensions
  • Exploded View
  • Parts List
  • Specifications
  • Warranty
  • SOOW Power Cord EPDM Power Cord Seal Minder® Cord Float Switch for Control Panel Float Switch for Pump Single Phase Control Panels 316 Stainless Steel Slide Rails Slide Rail Accessories

    Select Model

    Model Motor Rating (HP) Voltage Rated Amps Discharge Connection Max Solids Max Head Max GPM Phase Learn More
    JX22SS-230T Curves
    3 230, 3ph-60Hz 9 3" NPT-M 3/8" 75' 237 3 Details
    JX22SS-208T Curves
    3 208, 3ph-60Hz 9.45 3" NPT-M 3/8" 75' 237 3 Details
    JX15SS-575T Curves
    2 575, 3ph-60Hz 2.3 3" NPT-M 3/16" 60' 158 3 Details
    JX15SS-460T Curves
    2 460, 3ph-60Hz 3 3" NPT-M 3/16" 60' 158 3 Details
    JX15SS-230T Curves
    2 230, 3ph-60Hz 6 3" NPT-M 3/16" 60' 158 3 Details
    JX15SS-208T Curves
    2 208, 3ph-60Hz 6.3 3" NPT-M 3/16" 60' 158 3 Details
    JX08SS-575T Curves
    1 575, 3ph-60Hz 1.3 2" NPT-M 3/16" 50' 91 3 Details
    JX08SS-230T Curves
    1 230, 3ph-60Hz 3.2 2" NPT-M 3/16" 50' 91 3 Details
    JX08SS-208T Curves
    1 208, 3ph-60Hz 3.5 2" NPT-M 3/16" 50' 91 3 Details
    JX400SS-115 Curves
    0.5 115, 1ph-60Hz 7.6 2" NPT-M 1/8" 35' 66 1 Details
    JX400SS-230 Curves
    0.5 230, 1ph-60Hz 3.8 2" NPT-M 1/8" 35' 66 1 Details
    JX75CSS-575T Curves
    10 575, 3ph-60Hz 10.5 4" NPT-F 3/8" 110' 647 3 Details
    JX22SS-460T Curves
    3 460, 3ph-60Hz 4.5 3" NPT-M 3/8" 75' 237 3 Details
    JX75CSS-460T Curves
    10 460, 3ph-60Hz 15 4" NPT-F 3/8" 110' 647 3 Details
    JX750SS-230 Curves
    1 230, 3ph-60Hz 7 2" NPT-M 3/16" 50' 91 3 Details
    JX750SS-115 Curves
    1 115, 3ph-60Hz 14 2" NPT-M 3/16" 50' 91 3 Details
    JX55CSS-575T Curves
    7.5 575, 3ph-60Hz 7.6 4" NPT-F 3/8" 91' 515 3 Details
    JX55CSS-460T Curves
    7.5 460, 3ph-60Hz 10.5 4" NPT-F 3/8" 91' 515 3 Details
    JX55CSS-230T Curves
    7.5 230, 3ph-60Hz 21 4" NPT-F 3/8" 91' 515 3 Details
    JX37SS-575T Curves
    5 575, 3ph-60Hz 5.5 4" NPT-F (3"NPT-M optional) 3/8" 95' 264 3 Details
    JX37SS-460T Curves
    5 460, 3ph-60Hz 7 4" NPT-F (3" NPT-M optional) 3/8" 95' 264 3 Details
    JX37SS-230T Curves
    5 230, 3ph-60Hz 14 4" NPT-F (3" NPT-M optional) 3/8" 95' 264 3 Details
    JX37SS-208T Curves
    5 208, 3ph-60Hz 14.7 4" NPT-F (3" NPT-M optional) 3/8" 95' 264 3 Details
    JX22SS-575T Curves
    3 575, 3ph-60Hz 3.2 3" NPT-M 3/8" 75' 237 3 Details
    JX08SS-460T Curves
    2 230, 1ph-60Hz 14 2" NPT-M 3/16" 50' 91 1 Details
    JX150CSS-460T Curves
    20 460, 3ph-60Hz 23 6" ANSI Slip Weld Flange 1" 151' 730 3 Details
    JX150CSS-575T Curves
    20 575, 3ph-60Hz 18.4 6" ANSI Slip Weld Flange 1" 515' 730 3 Details
    JX220CSS-460T Curves
    30 460, 3ph-60Hz 32 6" ANSI Slip Weld Flange 1" 186' 760 3 Details
    JX220CSS-575T Curves
    30 575, 3ph-60Hz 25.6 6" ANSI Slip Weld Flange 1" 186' 760 3 Details