JXF Series

Side discharge submersibles are typically used in sump applications where the liquid level can be controlled and where the pumps are partially submerged when in operation. The JXF models are designed for general pumping purposes where the passing or shredding of larger solids is not required. JXF pumps are available in size 1 to 10 HP - 3 Phase. Dual mechanical seals with the lower seal made of highly wear resistant silicon carbide against silicon carbide for less downtime and long life. All "wet parts" are of highest quality 316 stainless steel. Wear parts are made of cast material. JXF pumps 1HP – 5HP are made with precision cast parts (also referred to as investment castings), the same quality that is used in aircraft and space vehicles due to its superior density and strength. Other models are manufactured with sand cast parts. All elastomers (gaskets and o-rings) are made of FKM.
View ModelsRequest Information
Download
Series Curves (PDF)
  • All metal parts exposed to pumped liquids are made of 316 stainless steel.
  • Elastomers are made of FKM.
  • Longer power cord – Standard 33 ft. power cord.
  • Three seal motor protection – Motor is protected by double mechanical seals. Lower seal made of silicon carbide/silicon carbide and upper seal is made of carbon/ceramic. An additional lip seal has been installed above the impeller to help prevent abrasives such as dirt, silt or sand from entering into the seal chamber.
  • More motor protection – Winding protection and (NEMA) Class R motor insulation with a thermal cut out switch that will allow the stator to have a winding temperature of up to 300° degrees F (150° C), superior to pumps with Class A and B insulation.
  • JX55SSF and JX75SSF MODELS – The 7.5 and 10 HP models are designed with an outer sleeve on the impeller shaft. Two oil seal rings, upper and lower, ride on this replaceable shaft which prevents the formation of grooves on the impeller shaft itself.
  • TWO PUMPS IN ONE – Most sizes can be converted to a high head version by merely changing the impeller and the suction plate. Other brands often require major changes to achieve different heads or volumes.
  • Slide Rail Systems – The JX55SSF and JX75SSF models can also be mounted on BJM slide rail systems.
  • Each pump is tested at factory, both for performance as well as safety. Level controls and level control systems are available.
  • Specifications dependent on model and may change without notice.
  • All single phase Fahrenheit® pumps are supplied with a NEMA 4X control box including pump start components, Seal Minder® relay, motor thermal sensor connections and (1) High Temperature wide angle float switch with 20’ cable. These single-phase controls meet UL 508A and cUL CSA-22.2 requirements.
  • Sales Brochure
  • Operation Manual
  • Operation Manual
  • Parts List
  • Specifications
  • Warranty
  • SOOW Power Cord EPDM Power Cord HI-TEMP Power Cord Seal Minder® Cord Manual Starter Box Auto Starter Box Simplex Three Phase Control Panels Duplex Three Phase Control Panel Seal Minder® & Tank Alarm Seal Minder Relay 316 Stainless Steel Slide Rails Slide Rail Accessories

    Select Model

    Model Motor Rating (HP) Voltage Rated Amps Discharge Connection Max Solids Max Head Max GPM Phase Learn More
    JX22SSF-460T Curves
    3 460, 3ph-60Hz 4.5 3" NPT-M 3/8" 75' 237 3 Details
    JX37SSF-460T Curves
    5 460, 3ph-60Hz 7 3" FLANGE W/ 4" NPT-F DISCHARGE 3/8" 95' 264 3 Details
    JX22SSF-208T Curves
    3 208, 3ph-60Hz 9.45 3" NPT-M 3/8" 75' 237 3 Details
    JX55CSSF-460T Curves
    7.5 460, 3ph-60Hz 10.5 4" NPT-F 3/8" 91' 515 3 Details
    JX15SSF-208T Curves
    2 208, 3ph-60Hz 6.3 3" NPT-M 3/16" 60' 158 3 Details
    JX37SSF-575T Curves
    5 575, 3ph-60Hz 5.5 3" FLANGE W/ 4" NPT-F DISCHARGE 3/8" 95' 264 3 Details
    JX08SSF-460T Curves
    1 460, 3ph-60Hz 1.6 2" NPT-M 3/16" 50' 91 3 Details
    JX1500SSF-230 Curves 2 230, 1ph-60Hz 16 3" NPT-M 3/16" 60' 158 1 Details
    JX400SSF-230 Curves 0.5 230, 1ph-60 Hz 5.5 2" NPT-M 1/8" 35' 66 1 Details
    JX08SSF-208T Curves
    1 208, 3ph-60Hz 3.5 2" NPT-M 3/16" 50' 91 3 Details
    JX400SSF-115 Curves 0.5 115, 1ph-60 Hz 8.5 2" NPT-M 1/8" 35' 66 1 Details
    JX22SSF-575T Curves
    3 575, 3ph-60Hz 3.2 3" NPT-M 3/8" 75' 237 3 Details
    JX08SSF-230T Curves
    1 230, 3ph-60Hz 3.2 2" NPT-M 3/16" 50' 91 3 Details
    JX55CSSF-575T Curves
    7.5 575, 3ph-60Hz 7.6 4" NPT-F 3/8" 91' 515 3 Details
    JX37SSF-230T Curves
    5 230, 3ph-60Hz 14 3" FLANGE W/ 4" NPT-F DISCHARGE 3/8" 95' 264 3 Details
    JX37SSF-208T Curves
    5 208, 3ph-60Hz 14.7 3" FLANGE W/ 4" NPT-F DISCHARGE 3/8" 95' 264 3 Details
    JX55CSSF-230T Curves
    7.5 230, 3ph-60Hz 21 4" NPT-F 3/8" 91' 515 3 Details
    JX08SSF-575T Curves
    1 575, 3ph-60Hz 1.3 2" NPT-M 3/16" 50' 91 3 Details
    JX15SSF-230T Curves
    2 230, 3ph-60Hz 6 3" NPT-M 3/16" 60' 158 3 Details
    JX75CSSF-460T Curves
    10 460, 3ph-60Hz 15 4" NPT-F 3/8" 110' 647 3 Details
    JX15SSF-575T Curves
    2 575, 3ph- 60 Hz 2.3 3" NPT-M 3/16" 60' 158 3 Details
    JX750SSF-230 Curves 1 230, 1ph-60Hz 8.5 2" NPT-M 3/16" 50' 91 1 Details
    JX75CSSF-575T Curves
    10 575, 3ph-60Hz 10.5 4" NPT-F 3/8" 110' 647 3 Details
    JX22SSF-230T Curves
    3 230, 3ph-60Hz 9 3" NPT-M 3/8" 75' 237 3 Details
    JX15SSF-460T Curves
    2 460, 3ph-60Hz 3 3" NPT-M 3/16" 60' 158 3 Details
    JX750SSF-115 Curves 1 115, 1ph-60 Hz 16 2" NPT-M 3/16" 50' 91 1 Details