KB Series

Used for settling basins, retention ponds, wash down sumps, sand & gravel dewatering, barge & tank cleanout, and more.
View ModelsRequest Information
Download
Series Curves (PDF)
  • Abrasive resistant chrome iron components:
    • Agitator – Fluidizes settled solids into suspension.
    • Wear plate – Replaceable hardened surface on the suction side where erosion would cause a loss of pump performance.
    • Semi-open impeller – handles some solids.
  • Every KB Series pump model is protected by:
    • Class H motor insulation and built in amperage (FLA) and temperature overload protection.
    • Double mechanical seals – SiC/SiC lower and carbon ceramic upper in a separate oil-filled seal chamber.
    • Heavy duty lip seal – Additional protection for the mechanical seals.
    • Stainless steel shaft and shaft sleeve – Saves on shaft wear due to abrasives and corrosion.
  • The KB Series are top discharge pumps:
    • KB Series pumps are utility pumps – Frequently dragged from one site to another. The KB doesn’t have a side discharge connection that can break off or be damaged as it is pulled and pushed into place.
    • Top discharge pumps are cooled by pumped liquid – The KB Series pumps can pump a sump or pit down to within “inches” of the bottom. A side discharge pump without a cooling jacket must stay submerged to avoid overheating, leaving as much as 3 feet of unpumped slurry.
    • Top discharge pumps are slim – Even the largest model with a 13.5 inch diameter will fit down a manhole with a hose attached. High-chrome agitator helps keep solids suspended in liquid and helps prevent pump from clogging.
    • Specifications dependent on model and may change without notice.
  • Sales Brochure
  • Operation Manual
  • Pump Dimensions
  • Exploded View
  • Parts List
  • Specifications
  • Warranty
  • SOOW Power Cord EPDM Power Cord Seal Minder® Cord Manual Starter Box Auto Starter Box Simplex Three Phase Control Panels Duplex Three Phase Control Panel Seal Minder® & Tank Alarm Seal Minder Relay

    Select Model

    Model Motor Rating (HP) Voltage Rated Amps Discharge Connection Max Solids Max Head Max GPM Phase Learn More
    KB110-460T Curves
    15 460, 3ph-60Hz 18.7 6" NPT-M 0.39" 138' 551 3 Details
    KB110-575T Curves
    15 575, 3ph-60Hz 13.7 6" NPT-M 0.39" 138' 551 3 Details
    KB110H-460T Curves
    15 460, 3ph-60Hz 18.7 4" NPT-M 0.39" 170' 356 3 Details
    KB110H-575T Curves
    15 575, 3ph-60Hz 13.7 4" NPT-M 0.39" 170' 356 3 Details
    KB55-230T Curves
    7.5 230, 3ph-60Hz 20.4 4" NPT-M 0.39" 91' 501 3 Details
    KB55-460T Curves
    7.5 460, 3ph-60Hz 9.9 4" NPT-M 0.39" 91' 501 3 Details
    KB55-575T Curves
    7.5 575, 3ph-60Hz 7.6 4" NPT-M 0.39" 91' 501 3 Details
    KB55H-230T Curves
    7.5 230, 3ph-60Hz 20.4 3" NPT-M 0.39" 117' 277 3 Details
    KB55H-460T Curves
    7.5 460, 3ph-60Hz 9.9 3" NPT-M 0.39" 117' 277 3 Details
    KB55H-575T Curves
    7.5 575, 3ph-60Hz 7.6 3" NPT-M 0.39" 117' 277 3 Details
    KB75-460T Curves
    10 460, 3ph-60Hz 13.6 6" NPT-M 0.39" 111' 650 3 Details
    KB75-575T Curves
    10 575, 3ph-60Hz 10.5 6" NPT-M 0.39" 111' 650 3 Details
    KB75H-460T Curves
    10 460, 3ph-60Hz 13.6 4" NPT-M 0.39" 141' 400 3 Details
    KB75H-575T Curves
    10 575, 3ph-60Hz 10.5 4" NPT-M 0.39" 141' 400 3 Details
    KB220-460T Curves
    30 460, 3ph-60Hz 32 6" NPT-M 1" 186' 810 3 Details
    KB220-575T Curves
    30 460, 3ph-60Hz 32 6" NPT-M 1" 186' 810 3 Details