
KB Series
Used for settling basins, retention ponds, wash down sumps, sand & gravel dewatering, barge & tank cleanout, and more.View ModelsRequest Information

Series Curves (PDF)
- Abrasive resistant chrome iron components:
- Agitator – Fluidizes settled solids into suspension.
- Wear plate – Replaceable hardened surface on the suction side where erosion would cause a loss of pump performance.
- Semi-open impeller – handles some solids.
- Every KB Series pump model is protected by:
- Class H motor insulation and built in amperage (FLA) and temperature overload protection.
- Double mechanical seals – SiC/SiC lower and carbon ceramic upper in a separate oil-filled seal chamber.
- Heavy duty lip seal – Additional protection for the mechanical seals.
- Stainless steel shaft and shaft sleeve – Saves on shaft wear due to abrasives and corrosion.
- The KB Series are top discharge pumps:
- KB Series pumps are utility pumps – Frequently dragged from one site to another. The KB doesn’t have a side discharge connection that can break off or be damaged as it is pulled and pushed into place.
- Top discharge pumps are cooled by pumped liquid – The KB Series pumps can pump a sump or pit down to within “inches” of the bottom. A side discharge pump without a cooling jacket must stay submerged to avoid overheating, leaving as much as 3 feet of unpumped slurry.
- Top discharge pumps are slim – Even the largest model with a 13.5 inch diameter will fit down a manhole with a hose attached. High-chrome agitator helps keep solids suspended in liquid and helps prevent pump from clogging.
- Specifications dependent on model and may change without notice.
Select Model
Model | Motor Rating (HP) | Voltage | Rated Amps | Discharge Connection | Max Solids | Max Head | Max GPM | Phase | Learn More |
---|---|---|---|---|---|---|---|---|---|
KB110-460T
Curves
![]() |
15 | 460, 3ph-60Hz | 18.7 | 6" NPT-M | 0.39" | 138' | 551 | 3 | Details |
KB110-575T
Curves
![]() |
15 | 575, 3ph-60Hz | 13.7 | 6" NPT-M | 0.39" | 138' | 551 | 3 | Details |
KB110H-460T | 15 | 460, 3ph-60Hz | 18.7 | 4" NPT-M | 0.39" | 170' | 356 | 3 | Details |
KB110H-575T | 15 | 575, 3ph-60Hz | 13.7 | 4" NPT-M | 0.39" | 170' | 356 | 3 | Details |
KB55-230T
Curves
![]() |
7.5 | 230, 3ph-60Hz | 20.4 | 4" NPT-M | 0.39" | 91' | 501 | 3 | Details |
KB55-460T
Curves
![]() |
7.5 | 460, 3ph-60Hz | 9.9 | 4" NPT-M | 0.39" | 91' | 501 | 3 | Details |
KB55-575T
Curves
![]() |
7.5 | 575, 3ph-60Hz | 7.6 | 4" NPT-M | 0.39" | 91' | 501 | 3 | Details |
KB55H-230T | 7.5 | 230, 3ph-60Hz | 20.4 | 3" NPT-M | 0.39" | 117' | 277 | 3 | Details |
KB55H-460T | 7.5 | 460, 3ph-60Hz | 9.9 | 3" NPT-M | 0.39" | 117' | 277 | 3 | Details |
KB55H-575T | 7.5 | 575, 3ph-60Hz | 7.6 | 3" NPT-M | 0.39" | 117' | 277 | 3 | Details |
KB75-460T
Curves
![]() |
10 | 460, 3ph-60Hz | 13.6 | 6" NPT-M | 0.39" | 111' | 650 | 3 | Details |
KB75-575T
Curves
![]() |
10 | 575, 3ph-60Hz | 10.5 | 6" NPT-M | 0.39" | 111' | 650 | 3 | Details |
KB75H-460T | 10 | 460, 3ph-60Hz | 13.6 | 4" NPT-M | 0.39" | 141' | 400 | 3 | Details |
KB75H-575T | 10 | 575, 3ph-60Hz | 10.5 | 4" NPT-M | 0.39" | 141' | 400 | 3 | Details |
KB220-460T
Curves
![]() |
30 | 460, 3ph-60Hz | 32 | 6" NPT-M | 1" | 186' | 810 | 3 | Details |
KB220-575T
Curves
![]() |
30 | 460, 3ph-60Hz | 32 | 6" NPT-M | 1" | 186' | 810 | 3 | Details |