Download
Series Curves (PDF)
    • Abrasive resistant chrome iron components:
      • Agitator – Fluidizes settled solids into suspension.
      • Wear plate – Replaceable hardened surface on the suction side where erosion would cause a loss of pump performance.
      • Semi-open impeller to handle some solids.

Every KBHF pump model is protected by:

    • Class R motor insulation and built-in amperage (FLA) and temperature overload protection.
    • Double mechanical seals – SiC/SiC – FKM lower and carbon ceramic FKM upper in a separate oil-filled seal chamber.
    • Heavy duty lip seal – Additional protection for the mechanical seals.
    • Stainless steel shaft and shaft sleeve – Save on shaft wear due to abrasives and corrosion.
  • The KBHF Series are top discharge pumps:
    • KBHF Series pumps are utility pumps and frequently dragged from one site to another. The KBHF doesn’t have a side discharge connection that can break off or be damaged as it is pulled and pushed into place.
    • Top discharge pumps are cooled by pumped liquid – The KBHF pumps can pump a sump or pit down to within inches of the bottom. A side discharge pump without a cooling jacket must stay submerged to avoid overheating, leaving as much as three feet of unpumped slurry.
    • Top discharge means slim – even the largest model with a 13.5 inch “waistline” will fit down a manhole with a hose attached. High-chrome agitator helps keep solids suspended in liquid and helps prevent pump from clogging.
  • High-chrome agitator helps keep solids suspended in liquid and helps prevent pump from clogging.
  • Specifications dependent on model and may change without notice.
  • Operation Manual
  • Pump Dimensions
  • Exploded View
  • Parts List
  • Warranty
  • SOOW Power Cord EPDM Power Cord HI-TEMP Power Cord Seal Minder® Cord Manual Starter Box Auto Starter Box Simplex Three Phase Control Panels Duplex Three Phase Control Panel Seal Minder® & Tank Alarm Seal Minder Relay

    Select Model

    Model Motor Rating (HP) Voltage Rated Amps Discharge Connection Max Solids Max Head Max GPM Phase Learn More
    KB55HF-230 Curves
    7.5 230, 3ph-60Hz 20.4 3" NPT-M 0.39" 117' 277 3 Details
    KB55HF-460 Curves
    7.5 460, 3ph-60Hz 9.9 3" NPT-M 0.39" 117' 277 3 Details
    KB55HF-575 Curves
    7.5 575, 3ph-60Hz 7.6 3" NPT-M 0.39" 117' 277 3 Details
    KB75HF-460 Curves
    10 460, 3ph-60Hz 13.6 4" NPT-M 0.39" 141' 400 3 Details
    KB75HF-575 Curves
    10 575, 3ph-60Hz 10.5 4" NPT-M 0.39" 141' 400 3 Details
    KB110HF-460 Curves
    15 460, 3ph-60Hz 18.7 4" NPT-M 0.39" 170' 356 3 Details
    KB110HF-575 Curves
    15 575, 3ph-60Hz 13.7 4" NPT-M 0.39" 170' 356 3 Details