SKF Series

Electric submersible pumps with shredder action impellers for municipal, industrial and agricultural wastewater. The SKF Series shredder pumps are designed to obliterate solids by tearing, breaking and ripping them to pieces and can handle liquids up to 200°F. The shredding action is caused by using a cutting impeller with a tungsten carbide tip against a spiral-shaped diffuser plate.
View ModelsRequest Information
Download
Series Curves (PDF)
  • Longer power cord – Standard 33ft. power cord.
  • 304 stainless steel motor housing – Superior abrasion resistance will not wear out like aluminum motor housings when pumping sandy water.
  • Three seal motor protection – Motor is protected by double mechanical seals. Lower seal made of silicon carbide/silicon carbide and upper seal is made of carbon/ceramic. An additional lip seal has been installed above the impeller to help prevent abrasives such as dirt, silt or sand from entering into the seal chamber.
  • Winding protection and (NEMA) Class F motor insulation protect motor from temperature up to 230°F, superior to pumps with Class A and B insulation.
  • High temperature automatic overload switch protects against motor failure due to overheating.
  • Hardened cast iron stands up to rough handling and pumping sandy water unlike pumps with soft resin impellers or plastic exterior components.
  • Specifications dependent on model and may change without notice.
  • All single phase Fahrenheit pumps are supplied with a NEMA 4X control box including pump start components, Seal Minder relay, motor thermal sensor connections and (1) High Temperature wide angle float switch with 20’ cable. These single-phase controls meet UL 508A and cUL CSA-22.2 requirements.
  • Sales Brochure
  • Operation Manual
  • Operation Manual
  • Exploded View
  • Parts List
  • Specifications
  • Warranty
  • SOOW Power Cord EPDM Power Cord HI-TEMP Power Cord Seal Minder® Cord Float Switch for Control Panel Float Switch for Pump Single Phase Control Panels Cast Iron Slide Rails Slide Rail Accessories

    Select Model

    Model Motor Rating (HP) Voltage Rated Amps Discharge Connection Max Solids Max Head Max GPM Phase Learn More
    SK08CF-575T Curves
    1 575, 3ph- 60 Hz 1.3 2" NPT-M 2" 48' 95 3 Details
    SK55CF-230T Curves
    7.5 230, 3ph- 60 Hz 21 4" NPT-F 3.5" 54' 570 3 Details
    SK150CF-575T Curves
    20 575, 3ph- 60 Hz 19.8 6" FLANGE,ANSI 3.5" 101' 911 3 Details
    SK22CF-575T Curves
    3 575, 3ph- 60 Hz 3.2 3" NPT-M 1.6" 45' 270 3 Details
    SK37CF-460T Curves
    5 460, 3ph- 60 Hz 7 3" FLANGE W/ 4" NPT-F DISCHARGE 1.6" 62' 360 3 Details
    SK15CF-575T Curves 2 575, 3ph- 60 Hz 2.3 3" NPT-M 1.6" 42' 220 3 Details
    SK08CF-460T Curves
    1 460, 3ph- 60 Hz 1.6 2" NPT-M 2" 48' 95 3 Details
    SK37CF-208T Curves
    5 208, 3ph- 60 Hz 14.7 3" FLANGE W/ 4" NPT-F DISCHARGE 1.6" 62' 360 3 Details
    SK1500CF-230 Curves
    2 230, 1ph-60 Hz 16 3" NPT-M 1.6" 40.8' 220 1 Details
    SK110CF-575T Curves
    15 575, 3ph- 60 Hz 13.7 6" FLANGE,ANSI 3.5" 94' 845 3 Details
    SK15CF-460T Curves 2 460, 3ph- 60 Hz 3 3" NPT-M 1.6" 42' 220 3 Details
    SK150CF-460T Curves
    20 460, 3ph- 60 Hz 25.7 6" FLANGE,ANSI 3.5" 101' 911 3 Details
    SK08CF-208T Curves
    1 208, 3ph- 60 Hz 3.5 2" NPT-M 2" 48' 95 3 Details
    SK75CF-460T Curves
    10 460, 3ph- 60 Hz 15 4" NPT-F 3.5" 64' 670 3 Details
    SK22CF-460T Curves
    3 460, 3ph- 60 Hz 4.5 3" NPT-M 1.6" 45' 270 3 Details
    SK110CF-460T Curves
    15 460, 3ph- 60 Hz 19.8 6" FLANGE,ANSI 3.5" 94' 845 3 Details
    SK15CF-208T Curves 2 208, 3ph- 60 Hz 6.3 3" NPT-M 1.6" 42' 220 3 Details
    SK22CF-230T Curves
    3 230, 3ph- 60 Hz 9 3" NPT-M 1.6" 45' 270 3 Details
    SK37CF-230T Curves
    5 230, 3ph- 60 Hz 14 3" FLANGE W/ 4" NPT-F DISCHARGE 1.6" 62' 360 3 Details
    SK55CF-575T Curves
    7.5 575, 3ph- 60 Hz 7.8 4" NPT-F 3.5" 54' 570 3 Details
    SK15CF-230T Curves 2 230, 3ph- 60 Hz 6 3" NPT-M 1.6" 42' 220 3 Details
    SK37CF-575T Curves
    5 575, 3ph- 60 Hz 5.5 3" FLANGE W/ 4" NPT-F DISCHARGE 1.6" 62' 360 3 Details
    SK75CF-575T Curves
    10 575, 3ph- 60 Hz 10.5 4" NPT-F 3.5" 64' 670 3 Details
    SK55CF-460T Curves
    7.5 460, 3ph- 60 Hz 10.5 4" NPT-F 3.5" 54' 570 3 Details
    SK08CF-230T Curves
    1 230, 3ph- 60 Hz 3.2 2" NPT-M 2" 48' 95 3 Details
    SK22CF-208T Curves
    3 208, 3ph- 60 Hz 9.45 3" NPT-M 1.6" 45' 270 3 Details
    SK150CF-575T Curves 20 575, 3ph- 60 Hz 19.8 6" FLANGE,ANSI 3.5" 101' 911 3 Details
    SK75CF-460T Curves 10 460, 3ph- 60 Hz 15 4" NPT-F 3.5" 64' 670 3 Details
    SK110CF-575T Curves 15 575, 3ph- 60 Hz 13.7 6" FLANGE,ANSI 3.5" 94' 845 3 Details
    SK1500CF-230 Curves 2 230, 1ph-60 Hz 16 3" NPT-M 1.6" 40.8' 220 1 Details
    SK22CF-460T Curves 3 460, 3ph- 60 Hz 4.5 3" NPT-M 1.6" 45' 270 3 Details
    SK37CF-230T Curves 5 230, 3ph- 60 Hz 14 3" FLANGE W/ 4" NPT-F DISCHARGE 1.6" 62' 360 3 Details
    SK08CF-208T Curves 1 208, 3ph- 60 Hz 3.5 2" NPT-M 2" 48' 95 3 Details
    SK15CF-208T Curves 2 208, 3ph- 60 Hz 6.3 3" NPT-M 1.6" 42' 220 3 Details
    SK37CF-208T Curves 5 208, 3ph- 60 Hz 14.7 3" FLANGE W/ 4" NPT-F DISCHARGE 1.6" 62' 360 3 Details
    SK110CF-460T Curves 15 460, 3ph- 60 Hz 19.8 6" FLANGE,ANSI 3.5" 94' 845 3 Details
    SK37CF-575T Curves 5 575, 3ph- 60 Hz 5.5 3" FLANGE W/ 4" NPT-F DISCHARGE 1.6" 62' 360 3 Details
    SK08CF-575T Curves 1 575, 3ph- 60 Hz 1.3 2" NPT-M 2" 48' 95 3 Details
    SK15CF-575T Curves 2 575, 3ph- 60 Hz 2.3 3" NPT-M 1.6" 42' 220 3 Details
    SK08CF-460T Curves 1 460, 3ph- 60 Hz 1.6 2" NPT-M 2" 48' 95 3 Details
    SK22CF-575T Curves 3 575, 3ph- 60 Hz 3.2 3" NPT-M 1.6" 45' 270 3 Details
    SK22CF-230T Curves 3 230, 3ph- 60 Hz 9 3" NPT-M 1.6" 45' 270 3 Details
    SK08CF-230T Curves 1 230, 3ph- 60 Hz 3.2 2" NPT-M 2" 48' 95 3 Details
    SK37CF-460T Curves 5 460, 3ph- 60 Hz 7 3" FLANGE W/ 4" NPT-F DISCHARGE 1.6" 62' 360 3 Details
    SK55CF-460T Curves 7.5 460, 3ph- 60 Hz 10.5 4" NPT-F 3.5" 54' 570 3 Details
    SK55CF-230T Curves 7.5 230, 3ph- 60 Hz 21 4" NPT-F 3.5" 54' 570 3 Details
    SK15CF-230T Curves 2 230, 3ph- 60 Hz 6 3" NPT-M 1.6" 42' 220 3 Details
    SK75CF-575T Curves 10 575, 3ph- 60 Hz 10.5 4" NPT-F 3.5" 64' 670 3 Details
    SK55CF-575T Curves 7.5 575, 3ph- 60 Hz 7.8 4" NPT-F 3.5" 54' 570 3 Details
    SK15CF-460T Curves 2 460, 3ph- 60 Hz 3 3" NPT-M 1.6" 42' 220 3 Details
    SK22CF-208T Curves
    3 208, 3ph- 60 Hz 9.45 3" NPT-M 1.6" 45' 270 3 Details
    SK150CF-460T Curves 20 460, 3ph- 60 Hz 25.7 6" FLANGE,ANSI 3.5" 101' 911 3 Details