SKXF Series

316 cast stainless steel pumps with shredder action impellers for municipal, industrial and agricultural wastewater. Side discharge and non-clog single vane or double vane impellers for the passing of solids while delivering high volume of liquids. The SKXF Series shredder pumps are designed to obliterate solids by tearing, breaking and ripping them to pieces. The shredding action is caused by using a cutting impeller with a tungsten carbide tip against a spiral-shaped diffuser plate. All wear and "wet" parts such as impeller, wear plate, oil housing, pump housing and inner pump top are made of cast 316 stainless material. The elastomers such as o-rings, lip seals and gaskets are made of FKM.
View ModelsRequest Information
Download
Series Curves (PDF)
  • All parts exposed to pumped liquids (such as impeller, wear plate, oil housing, pump housing and inner pump top) are made of 316 stainless steel.
  • Elastomers are made of FKM
  • Longer power cord – Standard 33ft. power cord.
  • Three seal motor protection – Motor is protected by double mechanical seals. Lower seal made of silicon carbide/silicon carbide and upper seal is made of carbon/ceramic. An additional lip seal has been installed above the impeller to help prevent abrasives such as dirt, silt or sand from entering into the seal chamber.
  • Winding protection and (NEMA) Class R motor insulation with a thermal cut out switch that will allow the stator to have a winding temperature of up to 300° degrees F (150°C), superior to pumps with Class A and B insulation.
  • Each pump is tested at factory, both for performance as well as safety. Level controls and level control systems are available.
  • Specifications dependent on model and may change without notice.
  • All single phase Fahrenheit pumps are supplied with a NEMA 4X control box including pump start components, Seal Minder relay, motor thermal sensor connections and (1) High Temperature wide angle float switch with 20’ cable. These single-phase controls meet UL 508A and cUL CSA-22.2 requirements.
  • Sales Brochure
  • Operation Manual
  • Operation Manual
  • Pump Dimensions
  • Exploded View
  • Parts List
  • Specifications
  • Warranty
  • SOOW Power Cord EPDM Power Cord HI-TEMP Power Cord Seal Minder® Cord Float Switch for Control Panel Float Switch for Pump Single Phase Control Panels 316 Stainless Steel Slide Rails Manual Starter Box Auto Starter Box Simplex Three Phase Control Panels Duplex Three Phase Control Panel Seal Minder® & Tank Alarm Seal Minder Relay Slide Rail Accessories

    Select Model

    Model Motor Rating (HP) Voltage Rated Amps Discharge Connection Max Solids Max Head Max GPM Phase Learn More
    SKX750CSSF-115 Curves
    1 115, 1ph-60Hz 16 2" NPT-M 2" 48' 95 1 Details
    SKX750CSSF-230 Curves
    1 230, 1ph-60Hz 8.5 2" NPT-M 2" 48' 95 1 Details
    SKX08CSSF-208T Curves
    1 208, 3ph-60Hz 3.5 2" NPT-M 2" 48' 95 3 Details
    SKX08CSSF-230T Curves
    1 230, 3ph-60Hz 3.2 2" NPT-M 2" 48' 95 3 Details
    SKX08CSSF-460T Curves
    1 460, 3ph-60Hz 1.6 2" NPT-M 2" 48' 95 3 Details
    SKX08CSSF-575T Curves
    1 575, 3ph-60Hz 1.3 2" NPT-M 2" 48' 95 3 Details
    SKX15CSSF-208T Curves
    2 208, 3ph-60Hz 6.3 3" NPT-M 1.6" 42' 220 3 Details
    SKX15CSSF-230T Curves
    2 230, 3ph-60Hz 6 3" NPT-M 1.6" 42' 220 3 Details
    SKX15CSSF-460T Curves
    2 460, 3ph-60Hz 3 3" NPT-M 1.6" 42' 220 3 Details
    SKX15CSSF-575T Curves
    2 575, 3ph-60Hz 2.3 3" NPT-M 1.6" 42' 220 3 Details
    SKX1500CSSF-230 Curves
    2 230, 1ph-60Hz 16 3" NPT-M 1.6" 40.8' 220 1 Details
    SKX22CSSF-208T Curves
    3 208, 3ph-60Hz 9.45 3" NPT-M 1.6" 45' 270 3 Details
    SKX22CSSF-230T Curves
    3 230, 3ph-60Hz 9 3" NPT-M 1.6" 45' 270 3 Details
    SKX22CSSF-460T Curves
    3 460, 3ph-60Hz 4.5 3" NPT-M 1.6" 45' 270 3 Details
    SKX22CSSF-575T Curves
    3 575, 3ph-60Hz 3.2 3" NPT-M 1.6" 45' 270 3 Details
    SKX37CSSF-208T Curves
    5 208, 3ph-60Hz 14.7 3" FLANGE W/ 4" NPT-F DISCHARGE 1.6" 62' 360 3 Details
    SKX37CSSF-230T Curves
    5 230, 3ph-60Hz 14 3" FLANGE W/ 4" NPT-F DISCHARGE 1.6" 62' 360 3 Details
    SKX37CSSF-460T Curves
    5 460, 3ph-60Hz 7 3" FLANGE W/ 4" NPT-F DISCHARGE 1.6" 62' 360 3 Details
    SKX37CSSF-575T Curves
    5 575, 3ph-60Hz 5.5 3" FLANGE W/ 4" NPT-F DISCHARGE 1.6" 62' 360 3 Details
    SKX55CSSF-230T Curves
    7.5 230, 3ph-60Hz 21 4" NPT-F 3.5" 54' 570 3 Details
    SKX55CSSF-460T Curves
    7.5 460, 3ph-60Hz 10.5 4" NPT-F 3.5" 54' 570 3 Details
    SKX55CSSF-575T Curves
    7.5 575, 3ph-60Hz 7.8 4" NPT-F 3.5" 54' 570 3 Details
    SKX75CSSF-460T Curves
    10 460, 3ph-60Hz 15 4" NPT-F 3.5" 64' 670 3 Details
    SKX75CSSF-575T Curves
    10 575, 3ph-60Hz 10.5 4" NPT-F 3.5" 73' 700 3 Details
    SKX110CSSF-460T Curves
    15 460, 3ph-60Hz 19.8 6" FLANGE,ANSI 3.5" 94' 845 3 Details
    SKX110CSSF-575T Curves
    15 575, 3ph-60Hz 13.7 6" FLANGE,ANSI 3.5" 94' 845 3 Details
    SKX150CSSF-460T Curves
    20 460, 3ph-60Hz 25.7 6" FLANGE, ANSI 3.5" 101' 911 3 Details
    SKX150CSSF-575T Curves
    20 575, 3ph-60Hz 19.8 6" FLANGE, ANSI 3.5" 101' 911 3 Details