SV Series
Non-clog electric submersible pumps for sludge, sewage, trash & industrial waste. The SV Series pumps are equipped with Vortex impellers, undoubtedly the best non-clog impellers ever invented for the handling of mud, raw sewage, viscous liquids, rags, wood chips and other solids. They pass solid up to 90% of pump outlet diameter.View ModelsRequest Information
DownloadSeries Curves (PDF)
- Longer power cord – Standard 50ft. high temperature power cord on pumps.
- 304 stainless steel motor housing – Superior abrasion resistance will not wear out like aluminum motor housings when pumping sandy water.
- Three seal motor protection – Motor is protected by double mechanical seals. Lower seal made of silicon carbide/silicon carbide and upper seal is made of carbon/ceramic. An additional lip seal has been installed above the impeller to help prevent abrasives such as dirt, silt or sand from entering into the seal chamber.
- Winding protection and (NEMA) Class F motor insulation protect motor from temperature up to 230°F, superior to pumps with Class A and B insulation.
- High temperature automatic overload switch protects against motor failure due to overheating.
- Hardened cast iron stands up to rough handling and pumping sandy water unlike pumps with soft resin impellers or plastic exterior components.
- Specifications dependent on model & may change without notice.
- All single phase Fahrenheit pumps are supplied with a NEMA 4X control box including pump start components, Seal Minder relay, motor thermal sensor connections and (1) High Temperature wide angle float switch with 20’ cable. These single-phase controls meet UL 508A and cUL CSA-22.2 requirements.
Select Model
| Model | Motor Rating (HP) | Voltage | Rated Amps | Discharge Connection | Max Solids | Max Head | Max GPM | Phase | Learn More |
|---|---|---|---|---|---|---|---|---|---|
SV22CF-208T
Curves
 |
3 | 208, 3ph- 60 Hz | 9.45 | 3" NPT-F | 3" | 30.8' | 253 | 3 | Details |
SV400-115
Curves
 |
0.5 | 115, 1ph-60 Hz | 7.6 | 2" NPT-M | 1.5" | 22' | 59 | 1 | Details |
|
SV400-230
Curves
|
0.5 | 230, 1ph-60 Hz | 3.8 | 2" NPT-M | 1.5" | 22' | 59 | 1 | Details |
SV750C-115
Curves
 |
1 | 115, 1ph-60 Hz | 14 | 3" NPT-M (2" NPT-M optional) | 2" | 30' | 100 | 1 | Details |
|
SV750C-230
Curves
|
1 | 230, 1ph-60 Hz | 7 | 3" NPT-M | 2" | 31' | 100 | 1 | Details |
SV08C-208T
Curves
 |
1 | 208, 3ph- 60 Hz | 3.5 | 3" NPT-M (2" NPT-M optional) | 2" | 30' | 100 | 3 | Details |
|
SV08C-230T
Curves
|
1 | 230, 3ph- 60 Hz | 3.2 | 3" NPT-M (2" NPT-M optional) | 2" | 30' | 100 | 3 | Details |
|
SV08C-460T
Curves
|
1 | 460, 3ph- 60 Hz | 1.6 | 3" NPT-M (2" NPT-M optional) | 2" | 30' | 100 | 3 | Details |
|
SV08C-575T
Curves
|
1 | 575, 3ph- 60 Hz | 1.3 | 3" NPT-M (2" NPT-M optional) | 2" | 30' | 100 | 3 | Details |
SV15C-208T
Curves
 |
2 | 208, 3ph- 60 Hz | 6.3 | 3" NPT-F | 2.5" | 29' | 171 | 3 | Details |
|
SV15C-230T
Curves
|
2 | 230, 3ph- 60 Hz | 6 | 3" NPT-F | 2.5" | 29' | 171 | 3 | Details |
|
SV15C-460T
Curves
|
2 | 460, 3ph- 60 Hz | 3 | 3" NPT-F | 2.5" | 29' | 171 | 3 | Details |
|
SV15C-575T
Curves
|
2 | 575, 3ph- 60 Hz | 2.3 | 3" NPT-F | 2.5" | 29' | 171 | 3 | Details |
SV1500C-230
Curves
 |
2 | 230, 1ph-60 Hz | 14 | 3" NPT-F | 2.5" | 29' | 171 | 1 | Details |
SV22C-208T
Curves
 |
3 | 208, 3ph- 60 Hz | 9.45 | 3" NPT-F | 3" | 30.8' | 253 | 3 | Details |
|
SV22C-230T
Curves
|
3 | 230, 3ph- 60 Hz | 9 | 3" NPT-F | 3" | 30.8' | 253 | 3 | Details |
|
SV22C-460T
Curves
|
3 | 460, 3ph- 60 Hz | 4.5 | 3" NPT-F | 3" | 30.8' | 253 | 3 | Details |
|
SV22C-575T
Curves
|
3 | 575, 3ph- 60 Hz | 3.2 | 3" NPT-F | 3" | 30.8' | 253 | 3 | Details |
SV37C-208T
Curves
 |
5 | 208, 3ph- 60 Hz | 14.7 | 3" NPT-F | 3" | 44' | 317 | 3 | Details |
|
SV37C-230T
Curves
|
5 | 230, 3ph- 60 Hz | 14 | 3" NPT-F | 3" | 44' | 317 | 3 | Details |
|
SV37C-460T
Curves
|
5 | 460, 3ph- 60 Hz | 7 | 3" NPT-F | 3" | 44' | 317 | 3 | Details |
|
SV37C-575T
Curves
|
5 | 575, 3ph- 60 Hz | 5.5 | 3" NPT-F | 3" | 44' | 317 | 3 | Details |
SV55C-230T
Curves
 |
7.5 | 230, 3ph- 60 Hz | 21 | 4" NPT-F | 3.5" | 42' | 660 | 3 | Details |
|
SV55C-460T
Curves
|
7.5 | 460, 3ph- 60 Hz | 10.5 | 4" NPT-F | 3.5" | 42' | 660 | 3 | Details |
|
SV55C-575T
Curves
|
7.5 | 575, 3ph- 60 Hz | 7.8 | 4" NPT-F | 3.5" | 42' | 660 | 3 | Details |
SV75C-460T
Curves
 |
10 | 460, 3ph- 60 Hz | 15 | 4" NPT-F | 3.5" | 48' | 726 | 3 | Details |
|
SV75C-575T
Curves
|
10 | 575, 3ph- 60 Hz | 10.5 | 4" NPT-F | 3.5" | 48' | 726 | 3 | Details |
