
XP-JX Series
316 cast stainless steel explosion proof electric submersible pumps for use in Class I, Division 1, Groups C & D Hazardous Locations The XP-JX Series are corrosion resistant, FM-rated explosion proof submersible pumps designed for top performance. All "wet" parts such as impeller and wear plate are made of cast 316 stainless material. The elastomers such as o-rings, lip seals and gaskets are made of FKM. Standard power cable is made of oil-resistant material. Special installation can be made with EPDM power-cable and elastomers. (BUNA (Nitril) also available). FM-approved motor for use in Class I, Division 1, Groups C & D hazardous locations. Available in 208, 230, 460 or 575 Volt 60Hz. Contact factory for 50Hz availability. High head models available.View ModelsRequest Information

Series Curves (PDF)
- All parts exposed to pumped liquids are made of 316 stainless steel.
- Three seal motor protection – Motor is protected by two independent mechanical seals. Lower seal made of silicon carbide/silicon carbide and upper seal is made of carbon/ceramic. An additional lip seal has been installed to help prevent abrasives such as dirt, silt or sand from entering into the seal chamber. Standard elastomers are Buna N (FKM optional).
- Air-filled motor with winding protection and (NEMA) Class F motor insulation. Seal leakage detector(s) in seal chamber offers early warning should water enter the chamber.
- Epoxy-coated motor housing – Superior two part epoxy to protect the motor from exposure to the surrounding liquid.
- Tough pump construction – Hardened cast iron stands up to rough handling and pumping sandy water unlike pumps with soft resin impellers or plastic exterior components.
- Longer power cord – Standard 50ft. power.
- Specifications dependent on model and may change without notice
Select Model
Model | Motor Rating (HP) | Voltage | Rated Amps | Discharge Connection | Max Solids | Max Head | Max GPM | Phase | Learn More |
---|---|---|---|---|---|---|---|---|---|
XP-JX15SS-208T
Curves
![]() |
2 | 208 | 6.6 | 2" NPT-F | 3/16" | 60' | 158 | 3 | Details |
XP-JX15SS-230T
Curves
![]() |
2 | 230 | 6.2 | 2" NPT-F | 3/16" | 60' | 158 | 3 | Details |
XP-JX15SS-460T
Curves
![]() |
2 | 460 | 3.1 | 2" NPT-F | 3/16" | 60' | 158 | 3 | Details |
XP-JX15SS-575T
Curves
![]() |
2 | 575 | 2.5 | 2" NPT-F | 3/16" | 60' | 158 | 3 | Details |
XP-JX22SS-208T
Curves
![]() |
3 | 208 | 9.4 | 2" NPT-F | 3/8" | 75' | 237 | 3 | Details |
XP-JX22SS-230T
Curves
![]() |
3 | 230 | 8.9 | 2" NPT-F | 3/8" | 75' | 237 | 3 | Details |
XP-JX22SS-460T
Curves
![]() |
3 | 460 | 4.5 | 2" NPT-F | 3/8" | 75' | 237 | 3 | Details |
XP-JX22SS-575T
Curves
![]() |
3 | 575 | 3.6 | 2" NPT-F | 3/8" | 75' | 237 | 3 | Details |
XP-JX37SS-208T
Curves
![]() |
5 | 208 | 15 | 2" NPT-F | 3/8" | 95' | 264 | 3 | Details |
XP-JX37SS-230T
Curves
![]() |
5 | 230 | 13.9 | 2" NPT-F | 3/8" | 95' | 264 | 3 | Details |
XP-JX37SS-460T
Curves
![]() |
5 | 460 | 7 | 2" NPT-F | 3/8" | 95' | 264 | 3 | Details |
XP-JX37SS-575T
Curves
![]() |
5 | 575 | 5.6 | 2" NPT-F | 3/8" | 95' | 264 | 3 | Details |