XP-SKX Series

316 cast stainless steel explosion proof electric submersible pumps with shredder action impellers for use in Class I, Division 1, Groups C & D Hazardous Locations XP-SKX Series shredder series pumps are designed to obliterate solids by tearing, breaking and ripping them to pieces. The shredding action is caused by using a cutting impeller with a tungsten carbide tip against a spiral-shaped diffuser plate. XP-SKX pumps have non-clog impellers designed for high volume and lift performance. All "wet" parts (such as impeller, wear plate and pump housing) are made of cast 316 stainless material. The elastomers such as o-rings, lip seals and gaskets are made of FKM. Standard power cable is made of oil-resistant material. Special installation can be made with EPDM power-cable and elastomers. (BUNA (Nitril) also available). FM-approved motor for use in Class I, Division 1, Groups C & D hazardous locations. Available in 208, 230, 460 or 575 Volt 60Hz. Contact factory for 50Hz availability.
View ModelsRequest Information
Download
Series Curves (PDF)
  • All parts exposed to pumped liquids are made of 316 stainless steel.
  • Three seal motor protection – Motor is protected by two independent mechanical seals. Lower seal made of silicon carbide/silicon carbide and upper seal is made of carbon/ceramic. An additional lip seal has been installed to help prevent abrasives such as dirt, silt or sand, from entering into the seal chamber. Standard elastomers are Buna N (FKM optional).
  • Air-filled motor with winding protection and (NEMA) Class F motor insulation. Seal leakage detector(s) in seal chamber offers early warning should water enter the chamber.
  • Epoxy coated motor housing – Superior two part epoxy to protect the motor from exposure to the surrounding liquid.
  • Hardened cast iron stands up to rough handling and pumping sandy water unlike pumps with soft resin impellers or plastic exterior components.
  • Longer power cord – Standard 50ft. power.
  • Specifications dependent on model and may change without notice.
  • Sales Brochure
  • Operation Manual
  • Pump Dimensions
  • Exploded View
  • Parts List
  • Warranty
  • SOOW Power Cord EPDM Power Cord Seal Minder® Cord Manual Starter Box Auto Starter Box Simplex Three Phase Control Panels Duplex Three Phase Control Panel Seal Minder® & Tank Alarm Seal Minder Relay Non-Sparking Slide Rails 316 Stainless Steel Slide Rails Slide Rail Accessories

    Select Model

    Model Motor Rating (HP) Voltage Rated Amps Discharge Connection Max Solids Max Head Max GPM Phase Learn More
    XP-SKX15CSS-208T 2 208 6.6 3" NPT-M 1.6" 42' 220 3 Details
    XP-SKX15CSS-230T 2 230 6.2 3" NPT-M 1.6" 42' 220 3 Details
    XP-SKX15CSS-460T 2 460 3.1 3" NPT-M 1.6" 42' 220 3 Details
    XP-SKX15CSS-575T 2 575 2.5 3" NPT-M 1.6" 42' 220 3 Details
    XP-SKX22CSS-208T 3 208 9.4 3" NPT-M 1.6" 45' 270 3 Details
    XP-SKX22CSS-230T 3 230 8.9 3" NPT-M 1.6" 45' 270 3 Details
    XP-SKX22CSS-460T 3 460 4.5 3" NPT-M 1.6" 45' 270 3 Details
    XP-SKX22CSS-575T 3 575 3.6 3" NPT-M 2.5" 64' 291 3 Details
    XP-SKX37CSS-208T 5 208 15 3" NPT-M 1.6" 62' 360 3 Details
    XP-SKX37CSS-230T 5 230 13.9 3" NPT-M 1.6" 62' 360 3 Details
    XP-SKX37CSS-460T 5 460 7 3" NPT-M 1.6" 62' 360 3 Details
    XP-SKX37CSS-575T 5 575 5.6 3" NPT-M 1.6" 62' 360 3 Details
    XP-SKX55CSS-208T 7.5 208 21 4" NPT-F 3.5" 54' 570 3 Details
    XP-SKX55CSS-230T 7.5 230 19.4 4" NPT-F 3.5" 54' 570 3 Details
    XP-SKX55CSS-460T 7.5 460 9.7 4" NPT-F 3.5" 54' 570 3 Details
    XP-SKX55CSS-575T 7.5 575 7.8 4" NPT-F 3.5" 54' 570 3 Details
    XP-SKX75CSS-460T 10 460 12.6 4" NPT-F 3.5" 64' 670 3 Details
    XP-SKX75CSS-575T 10 575 10 4" NPT-F 3.5" 64' 670 3 Details
    XP-SKX110CSS-460T 15 460 17.5 4" NPT-F 3.5" 92' 870 3 Details
    XP-SKX110CSS-575T 15 575 14.9 4" NPT-F 3.5" 92' 870 3 Details
    XP-SKX150CSS-460T 20 460 24 4" NPT-F 3.5" 110' 900 3 Details
    XP-SKX150CSS-575T 20 575 19.2 4" NPT-F 3.5" 110' 900 3 Details